help - tanTALK

psdream · 01-31-2009, 10:24 AM

I bought a sonnenbraunne 735 from a tanning salon. It has a t-max 3a timer with it. It worked at the salon but not when i got it home what can I do to reset it.

engfant · 01-31-2009, 10:28 AM

what does the timer say? If it's just a "." then hold the up arrow till it resets to zero

psdream · 01-31-2009, 10:46 AM

caribbean tan man · 01-31-2009, 11:40 AM

you might have to reprogram the timer. it most likely needs to be set to stand alone mode.

contact tmax http://www.appdig.com/tmax/contact.htm

Brian Oshman · 02-01-2009, 04:32 PM

91 is a sentry code. Set parameter 4 to no sentry. (value of zero)

Follow this manual.

http://www.appdig.com/tmax/manuals/tmax3a.pdf

This manual does not show parameter 4 but tells you how to get into the parameter mode. Just go to parameter 4 (you can figure that out by reading how to get ino other parameters) and change the value to a zero.

Also, you have the power supply that runs the timer, right? It runs off of 9-12 volts AC or DC. There is no polarity and will automatically adjust itself for voltage input in that range and either alternating or direct current.

psdream · 02-04-2009, 08:30 PM

the manual said to get to the parameter 4 To hold the start stop button and the up button at the same time and it will display p. I pushed them and no change still 91.

01-31-2009, 10:24 AM	#1 (permalink)
psdream Join Date: Jan 31 2009 Posts: 3 Rep Power: 0	help I bought a sonnenbraunne 735 from a tanning salon. It has a t-max 3a timer with it. It worked at the salon but not when i got it home what can I do to reset it.

01-31-2009, 10:28 AM	#2 (permalink)
engfant Join Date: May 20 2003 Posts: 9,301 Rep Power: 29	Re: help what does the timer say? If it's just a "." then hold the up arrow till it resets to zero

01-31-2009, 10:46 AM	#3 (permalink)
psdream Join Date: Jan 31 2009 Posts: 3 Rep Power: 0	Re: help 91

01-31-2009, 11:40 AM	#4 (permalink)
caribbean tan man DERFTALK FBI AGENT Join Date: Jul 29 2003 Location: northeast Age: 48 Posts: 3,632 Rep Power: 46	Re: help you might have to reprogram the timer. it most likely needs to be set to stand alone mode. contact tmax http://www.appdig.com/tmax/contact.htm __________________ someone PM me when a good tanning topic is posted. :lol:

02-01-2009, 04:32 PM	#5 (permalink)
Brian Oshman Guest Join Date: Apr 29 2001 Location: Stewartsville, NJ Age: 55 Posts: 3,121 Rep Power: 0	Re: help 91 is a sentry code. Set parameter 4 to no sentry. (value of zero) Follow this manual. http://www.appdig.com/tmax/manuals/tmax3a.pdf This manual does not show parameter 4 but tells you how to get into the parameter mode. Just go to parameter 4 (you can figure that out by reading how to get ino other parameters) and change the value to a zero. Also, you have the power supply that runs the timer, right? It runs off of 9-12 volts AC or DC. There is no polarity and will automatically adjust itself for voltage input in that range and either alternating or direct current. Last edited by Brian Oshman; 02-01-2009 at 04:36 PM.

02-04-2009, 08:30 PM	#6 (permalink)
psdream Join Date: Jan 31 2009 Posts: 3 Rep Power: 0	Re: help the manual said to get to the parameter 4 To hold the start stop button and the up button at the same time and it will display p. I pushed them and no change still 91.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)