WILL THE T-MAX WIRELESS WORK?

parrot head · 09-17-2006, 06:55 AM

I use the t-max manager which is hard wired to all my tanning units. My question is this: I am adding more beds in the lower level of my salon. Can I leave all the beds upstairs as they are and use the wireless t-max on the beds I'm adding in the lower level? In other words will the manager receive signals from both wires and wireless at the same time? I think I goofed---this should most likely be in the technology forum. Maybe one of you nice Mods can move it for me. Thanks

Brian Oshman · 09-17-2006, 08:05 AM

Yes, It will work wired and wireless at the same time. You need to buy the reciever to connect to the Manager then ad your wireless timers.

Works similar to a wireless router. The router will accept wired and wireless protocl at the same time.

billable · 09-17-2006, 08:08 AM

Brian, aren't some beds coming out "wireless ready" so you just set the bed in and they already have the transmitter built in?

Also, if you install beds like parrothead is talking about and they are not wireless, you can buy one transmitter and daisy chain them into the one transmitter, right?

parrot head · 09-17-2006, 08:10 AM

Thanks for the info, Brian. That's exactly what I needed to know. And Billable; that's an interesting concept. I'll also check into doing that.

Kevin Barrett · 09-18-2006, 12:08 PM

Yes. some tanning beds are coming wireless ready. All you need to do is connect the G2 Access point to the tanning bed. all the supporting electronics is in the tanning bed.

Brian was correct (as usual:-). You simply connect the G2 Access Point to the end of the current wired daisy chain then connect a G2 Access point to the additional tanning beds you are adding.

Kevin Barrett
ADI Tech Support

parrot head · 09-19-2006, 11:39 AM

Kevin, What's the approximate cost of the G2's and the transmitter? Thanks

UltimateTanSJ · 09-19-2006, 11:44 AM

They are around $99 each.

Kevin Barrett · 09-19-2006, 12:49 PM

Correct! $99.00.

Kevin Barrett
ADI Tech Support

09-17-2006, 06:55 AM	#1 (permalink)
parrot head Police Department Join Date: Jul 13 2004 Location: Menomonie, Wi. Age: 67 Posts: 1,293 Rep Power: 6	WILL THE T-MAX WIRELESS WORK? I use the t-max manager which is hard wired to all my tanning units. My question is this: I am adding more beds in the lower level of my salon. Can I leave all the beds upstairs as they are and use the wireless t-max on the beds I'm adding in the lower level? In other words will the manager receive signals from both wires and wireless at the same time? I think I goofed---this should most likely be in the technology forum. Maybe one of you nice Mods can move it for me. Thanks Last edited by parrot head; 09-17-2006 at 07:07 AM.

09-17-2006, 08:05 AM	#2 (permalink)
Brian Oshman Brian Oshman Join Date: Apr 29 2001 Location: High Bridge, NJ Age: 39 Posts: 892 Rep Power: 12	Re: WILL THE T-MAX WIRELESS WORK? Yes, It will work wired and wireless at the same time. You need to buy the reciever to connect to the Manager then ad your wireless timers. Works similar to a wireless router. The router will accept wired and wireless protocl at the same time. __________________

09-17-2006, 08:08 AM	#3 (permalink)
billable I'm Banned Join Date: Feb 1 2006 Location: Tennessee Age: 47 Posts: 4,181 Rep Power: 0	Re: WILL THE T-MAX WIRELESS WORK? Brian, aren't some beds coming out "wireless ready" so you just set the bed in and they already have the transmitter built in? Also, if you install beds like parrothead is talking about and they are not wireless, you can buy one transmitter and daisy chain them into the one transmitter, right?

09-17-2006, 08:10 AM	#4 (permalink)
parrot head Police Department Join Date: Jul 13 2004 Location: Menomonie, Wi. Age: 67 Posts: 1,293 Rep Power: 6	Re: WILL THE T-MAX WIRELESS WORK? Thanks for the info, Brian. That's exactly what I needed to know. And Billable; that's an interesting concept. I'll also check into doing that. Last edited by parrot head; 09-17-2006 at 08:16 AM.

09-18-2006, 12:08 PM	#5 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	Re: WILL THE T-MAX WIRELESS WORK? Yes. some tanning beds are coming wireless ready. All you need to do is connect the G2 Access point to the tanning bed. all the supporting electronics is in the tanning bed. Brian was correct (as usual:-). You simply connect the G2 Access Point to the end of the current wired daisy chain then connect a G2 Access point to the additional tanning beds you are adding. Kevin Barrett ADI Tech Support

09-19-2006, 11:39 AM	#6 (permalink)
parrot head Police Department Join Date: Jul 13 2004 Location: Menomonie, Wi. Age: 67 Posts: 1,293 Rep Power: 6	Re: WILL THE T-MAX WIRELESS WORK? Kevin, What's the approximate cost of the G2's and the transmitter? Thanks

09-19-2006, 11:44 AM	#7 (permalink)
UltimateTanSJ I love Derf!! Join Date: Nov 8 2005 Location: California Age: 27 Posts: 690 Rep Power: 5	Re: WILL THE T-MAX WIRELESS WORK? They are around $99 each. __________________ Joseph ~I am the NFC~

09-19-2006, 12:49 PM	#8 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	Re: WILL THE T-MAX WIRELESS WORK? Correct! $99.00. Kevin Barrett ADI Tech Support

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Work Hours	Bronze Star	Salon Management	25	06-12-2007 06:48 PM
Do Not Call	Sheila in Minnesota	Open Forum	14	01-23-2006 10:17 PM
Bad Day At Work	missmojorising	Salon Management	2	12-26-2004 01:13 PM
All about the COPYRIGHT by: Microsoft® Encarta® Encyclopedia 2000.	cabosuntanning	Salon Management	3	07-10-2003 04:01 PM