I need help.... with tannig bed tec support

us cav · 05-15-2006, 12:26 AM

I have a Dr. Muller odyssey 3/29 6000watt bed. The problem is the facial bulbs are not working. Just replaced the bulbs and it did not make a differance. Does anyone have the stamatics or manual or know where i can download them form.

Thanks

Sarge · 05-15-2006, 10:54 AM

Could be a few different issues. Are all the facials out???

Dr. Muller/Future Industries: 800-346-3136 www.futureindustries.com

us cav · 05-15-2006, 08:33 PM

yes all facials are out.:(

caribbean tan man · 05-15-2006, 08:36 PM

possibly ignitors

sun2go · 05-15-2006, 09:30 PM

There should be safety switches on the facial glass. Make sure that they wer put back properly after the lamp change.

Do the body lamps come on ?

Sarge · 05-16-2006, 07:29 AM

us cav, if all the facials went out at the same time, I would believe its either the facial contactor or a switch. I really don't know this unit well but your best bet would be to call future. I left the number and web site above.

us cav · 05-17-2006, 12:32 AM

all the lamps work not facials.

mr belvedere · 05-17-2006, 01:25 AM

Most of the Muellers I've had experience with all have a "safety circuit" that prevents the lamps from lighting if it isn't engaged. The circuit uses a thin, spring-loaded metal wire which gets pushed in when the filter glass is put back in. Does this unit have anything like that?

us cav · 05-17-2006, 06:20 PM

yes it does. so do i just check the switch or is there a way to test them.:(

Sun Solution · 05-25-2006, 12:05 AM

Not sure if you are still having this problem, but as said above, the metal wire must be in between the 2 plates of glass, not on the outside of them. Also, these lamps cannot have any oil on them (as happens with touching them directly), so when you replaced them, if they were touched (rather than like using a towel), then likely you have blown the bulb. More likely though, is that the metal wire is not in place properly. Also, a problem we experienced once was that the 'safety' feature on these beds for the facials is actually the (almost putty-looking) substance that forms around the glass plate (looks like a circuit board wire pattern). If these are 'broken' (meaning there is a break in the pattern, not like an actual break in the glass), then they won't work. The whole piece of glass will need to be replaced then and it actually has nothing to do with the bulb itself. Hope you find a solution!!

05-15-2006, 10:54 AM	#2 (permalink)
Sarge Join Date: Feb 22 2003 Location: Michigan Age: 44 Posts: 1,521 Rep Power: 9	Re: I need help.... with tannig bed tec support Could be a few different issues. Are all the facials out??? Dr. Muller/Future Industries: 800-346-3136 www.futureindustries.com

05-15-2006, 08:33 PM	#3 (permalink)
us cav Join Date: May 14 2006 Posts: 5 Rep Power: 0	Re: I need help.... with tannig bed tec support yes all facials are out.:(

05-15-2006, 08:36 PM	#4 (permalink)
caribbean tan man DERFTALK FBI AGENT Join Date: Jul 29 2003 Location: northeast Age: 32 Posts: 5,290 Rep Power: 31	Re: I need help.... with tannig bed tec support possibly ignitors

05-16-2006, 07:29 AM	#6 (permalink)
Sarge Join Date: Feb 22 2003 Location: Michigan Age: 44 Posts: 1,521 Rep Power: 9	Re: I need help.... with tannig bed tec support us cav, if all the facials went out at the same time, I would believe its either the facial contactor or a switch. I really don't know this unit well but your best bet would be to call future. I left the number and web site above.

05-17-2006, 06:20 PM	#9 (permalink)
us cav Join Date: May 14 2006 Posts: 5 Rep Power: 0	Re: I need help.... with tannig bed tec support yes it does. so do i just check the switch or is there a way to test them.:(

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)