t max manager - Page 2

Neon Beach · 09-22-2006, 10:32 AM

It should tell you how to address the rooms.

Neon Beach · 09-22-2006, 10:45 AM

1.2 Auto Addressing the T-Max® 3-A Timers
Note: Customers should not be in tanning beds when auto addressing beds.
7) If the T-Max® Mgr has a key, turn the key one-quarter turn clockwise.
8) Apply power to the T-Max® Mgr. Then wait 10 seconds.
9) Press the Start/Stop button under displays 1 and 8 on the T-Max® Mgr
at the same time until the displays change. Release the Start/Stop
buttons.
10) Press and release the Start/Stop button under Display 2.
Display 3 on the T-Max® Manager will change to 1. Each T-Max® 3A
will show a "99" on their displays and beep continuously.
12) Press the Change Display Beds button on the lower left corner of the TMax
® Mgr. After a short pause, the T-Max® Mgr will scan and show a
number under each display that represents a bed number.
Installation is now complete.

Adgey · 09-22-2006, 10:59 AM

Thats great Neon.. thanks for all the help :)

Neon Beach · 09-22-2006, 11:06 AM

Welcome.

West Side Tanner · 09-22-2006, 02:48 PM

Neon Beach · 09-22-2006, 02:53 PM

Don't steal pictures.

West Side Tanner · 09-22-2006, 03:11 PM

:lol:

Adgey · 09-26-2006, 10:51 PM

Has anyone encountered this error, I can't seem to run my program:

Error #: 8005 - Port already open
Form: frmWaitingList::Get_Status()
Additional: T_MAX.Get_Status(Port #: 4, COMM Settings: 9600,n,8,1)
Line Number: 0

Possible Explanation:
TanTrack was trying to talk to your timer but for some reason the COM port was already in use. This can occur when using programs like 'AdNet' while running TanTrack.

Karstropicalhut · 10-12-2006, 08:49 AM

i need to stop the bed cool down on my tmax manager how do i do this
also i now have 14 beds however bed number 13 need to be skipped how do i make number 14 show up until i get bed 13 in?

Nichesoft · 10-12-2006, 01:49 PM

Error 8005 usually pops up when something else is using the COM port to communicate with the timer. You may want to try and disable any other programs that may be trying to use the COM port or restart the computer to resolve this issue.

09-22-2006, 10:32 AM	#11 (permalink)
Neon Beach I'm Banned Join Date: Nov 30 2000 Location: Ontario Age: 45 Posts: 52,065 Rep Power: 0	Re: t max manager It should tell you how to address the rooms.

09-22-2006, 10:45 AM	#12 (permalink)
Neon Beach I'm Banned Join Date: Nov 30 2000 Location: Ontario Age: 45 Posts: 52,065 Rep Power: 0	Re: t max manager 1.2 Auto Addressing the T-Max® 3-A Timers Note: Customers should not be in tanning beds when auto addressing beds. 7) If the T-Max® Mgr has a key, turn the key one-quarter turn clockwise. 8) Apply power to the T-Max® Mgr. Then wait 10 seconds. 9) Press the Start/Stop button under displays 1 and 8 on the T-Max® Mgr at the same time until the displays change. Release the Start/Stop buttons. 10) Press and release the Start/Stop button under Display 2. Display 3 on the T-Max® Manager will change to 1. Each T-Max® 3A will show a "99" on their displays and beep continuously. 12) Press the Change Display Beds button on the lower left corner of the TMax ® Mgr. After a short pause, the T-Max® Mgr will scan and show a number under each display that represents a bed number. Installation is now complete.

09-22-2006, 10:59 AM	#13 (permalink)
Adgey Join Date: Aug 8 2005 Location: Canada Age: 36 Posts: 60 Rep Power: 0	Re: t max manager Thats great Neon.. thanks for all the help :)

09-22-2006, 11:06 AM	#14 (permalink)
Neon Beach I'm Banned Join Date: Nov 30 2000 Location: Ontario Age: 45 Posts: 52,065 Rep Power: 0	Re: t max manager Welcome.

09-22-2006, 02:48 PM	#15 (permalink)
West Side Tanner Join Date: Dec 27 2003 Location: Florida Posts: 2,548 Rep Power: 5	Re: t max manager Meh!

09-22-2006, 02:53 PM	#16 (permalink)
Neon Beach I'm Banned Join Date: Nov 30 2000 Location: Ontario Age: 45 Posts: 52,065 Rep Power: 0	Re: t max manager Don't steal pictures.

09-22-2006, 03:11 PM	#17 (permalink)
West Side Tanner Join Date: Dec 27 2003 Location: Florida Posts: 2,548 Rep Power: 5	Re: t max manager :lol:

09-26-2006, 10:51 PM	#18 (permalink)
Adgey Join Date: Aug 8 2005 Location: Canada Age: 36 Posts: 60 Rep Power: 0	Re: t max manager Has anyone encountered this error, I can't seem to run my program: Error #: 8005 - Port already open Form: frmWaitingList::Get_Status() Additional: T_MAX.Get_Status(Port #: 4, COMM Settings: 9600,n,8,1) Line Number: 0 Possible Explanation: TanTrack was trying to talk to your timer but for some reason the COM port was already in use. This can occur when using programs like 'AdNet' while running TanTrack.

10-12-2006, 08:49 AM	#19 (permalink)
Karstropicalhut Join Date: Sep 30 2004 Location: essex Age: 51 Posts: 5 Rep Power: 0	Re: t max manager i need to stop the bed cool down on my tmax manager how do i do this also i now have 14 beds however bed number 13 need to be skipped how do i make number 14 show up until i get bed 13 in?

10-12-2006, 01:49 PM	#20 (permalink)
Nichesoft Join Date: Oct 7 2004 Location: Dallas,Tx Posts: 104 Rep Power: 4	Re: t max manager Error 8005 usually pops up when something else is using the COM port to communicate with the timer. You may want to try and disable any other programs that may be trying to use the COM port or restart the computer to resolve this issue.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)