Help, With Tanning Bed

wpspfan · 02-18-2006, 11:31 AM

It is a Tropical Rayz model # 383TRLANPWBVHR 10 minute bed. I just bought it from a salon and they had it on a timer and I am trying to transfer it back to the bed timer can anyone help me with this?

Neon Beach · 02-18-2006, 12:00 PM

Look at the back of the bench. There is likely a connector there, other than the main electrical cables. This should be where a remote timer was connected, it also could be an internal connections. This isused to bypass the dial timer.

wpspfan · 02-18-2006, 01:45 PM

I have found that connector, nothing is plugged into it, should there be? The problem I am having is the relay switch on the rolling panel is tripping. I can push it in and the fans will come on but if I want the bulds to come on I have to hold the relay button down. I am puzzled if it is not the timer bypass.

Dustin · 02-20-2006, 02:54 PM

You should try calling the vendor or a distributor to help you out

West Side Tanner · 02-22-2006, 10:09 AM

1-800-667-9189

caribbeansun01 · 02-22-2006, 10:13 AM

Yeah, they showed us something about a relay wire when they were putting our beds together.

michael00010 · 02-22-2006, 04:15 PM

Hi, ok on that plug in the back how many wires go to it? How many and what are their colours? Can you trace where these wires go inside the unit? there should be at least one ground either green or yellow, maybe 1- black, 1-white, and 1-red, is this the case? We can start from there.

michael00010 · 02-22-2006, 04:16 PM

I'm thinking that we may just have to jump a wire between 2 of the leads inside this plug and your bed timer should be back online.

Sarge · 02-28-2006, 10:22 AM

Give me a call and I can help you. 800-346-3584 ext. 308 thanks, Jeff

02-18-2006, 11:31 AM	#1 (permalink)
wpspfan Join Date: Feb 18 2006 Location: Home Posts: 2 Rep Power: 0	Help, With Tanning Bed It is a Tropical Rayz model # 383TRLANPWBVHR 10 minute bed. I just bought it from a salon and they had it on a timer and I am trying to transfer it back to the bed timer can anyone help me with this?

02-18-2006, 12:00 PM	#2 (permalink)
Neon Beach I'm Banned Join Date: Nov 30 2000 Location: Ontario Age: 45 Posts: 52,065 Rep Power: 0	Re: Help, With Tanning Bed Look at the back of the bench. There is likely a connector there, other than the main electrical cables. This should be where a remote timer was connected, it also could be an internal connections. This isused to bypass the dial timer.

02-18-2006, 01:45 PM	#3 (permalink)
wpspfan Join Date: Feb 18 2006 Location: Home Posts: 2 Rep Power: 0	Re: Help, With Tanning Bed I have found that connector, nothing is plugged into it, should there be? The problem I am having is the relay switch on the rolling panel is tripping. I can push it in and the fans will come on but if I want the bulds to come on I have to hold the relay button down. I am puzzled if it is not the timer bypass.

02-20-2006, 02:54 PM	#4 (permalink)
Dustin Official BFF Member Join Date: Feb 10 2005 Location: CO Posts: 5,926 Rep Power: 9	Re: Help, With Tanning Bed You should try calling the vendor or a distributor to help you out

02-22-2006, 10:09 AM	#5 (permalink)
West Side Tanner Join Date: Dec 27 2003 Location: Florida Posts: 2,548 Rep Power: 5	Re: Help, With Tanning Bed 1-800-667-9189

02-22-2006, 10:13 AM	#6 (permalink)
caribbeansun01 I love Derf!! Join Date: Dec 2 2004 Location: Depew, NY Posts: 1,679 Rep Power: 8	Re: Help, With Tanning Bed Yeah, they showed us something about a relay wire when they were putting our beds together. __________________

02-22-2006, 04:15 PM	#7 (permalink)
michael00010 Join Date: May 16 2005 Location: Canada Posts: 63 Rep Power: 0	Re: Help, With Tanning Bed Hi, ok on that plug in the back how many wires go to it? How many and what are their colours? Can you trace where these wires go inside the unit? there should be at least one ground either green or yellow, maybe 1- black, 1-white, and 1-red, is this the case? We can start from there.

02-22-2006, 04:16 PM	#8 (permalink)
michael00010 Join Date: May 16 2005 Location: Canada Posts: 63 Rep Power: 0	Re: Help, With Tanning Bed I'm thinking that we may just have to jump a wire between 2 of the leads inside this plug and your bed timer should be back online.

02-28-2006, 10:22 AM	#9 (permalink)
Sarge Join Date: Feb 22 2003 Location: Michigan Age: 44 Posts: 1,521 Rep Power: 9	Re: Help, With Tanning Bed Give me a call and I can help you. 800-346-3584 ext. 308 thanks, Jeff

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)