tmaxx manager

Karstropicalhut · 01-28-2006, 06:51 AM

i keep getting an e6 n code on my manager, what could be the problem?

DimiXTT · 01-28-2006, 11:45 AM

an E6 error, the T-max manager is recieving bad value from the 3A timer. Recycle power at the T-max manager, if that doesn't correct the problem. Replace the room timer with a new one.
Good luck

Kevin Barrett · 01-30-2006, 09:11 AM

Does the E-6 show up on various displays or just one? Try cycling power to each timer in each room then see if the problem goes away.

Kevin Barrett
ADI Tech Support

summrtan · 01-30-2006, 02:33 PM

A quick question, I am taking over a salon that uses client cards and adnet software with TMax timers, I will be hooking up Helios 11.4 and wanted to know if anything needs to be done to the manager (programming, reset etc) before using Helios? They also have the beds set up to start automatically after 4 minutes, I will not have an auto time set up, do I need to change anything?

Kevin Barrett · 01-30-2006, 04:06 PM

Nothing needs to programmed in the Manager. Addresses are stored in the timers in the rooms and are already set. You will install Helios and run it in place of ADNET. The T-Max Manager does not know the difference between ADNET, Helios or any other program. You'll be fine.

Kevin Barrett
ADI Tech Support

Karstropicalhut · 01-30-2006, 04:24 PM

just one room on the e6 code what exactly does e6 code mean?

summrtan · 01-31-2006, 09:32 AM

Quote:

Originally Posted by Kevin Barrett

Nothing needs to programmed in the Manager. Addresses are stored in the timers in the rooms and are already set. You will install Helios and run it in place of ADNET. The T-Max Manager does not know the difference between ADNET, Helios or any other program. You'll be fine.

Kevin Barrett
ADI Tech Support

So I will not need any software or anything in regards to adnet ot the manager? Just want to be sure before I undertake the project, I'm not sure if the previous owner has anything.

Kevin Barrett · 01-31-2006, 04:34 PM

ADNET is the utility we use to test the communications if you can not get Helios to talk. It is not needed for Helios to run. You know your serial port on your T-Max Manager is good because you are using ADNET now.

Kevin Barrett
ADI Tech Support

01-28-2006, 06:51 AM	#1 (permalink)
Karstropicalhut Join Date: Sep 30 2004 Location: essex Age: 51 Posts: 5 Rep Power: 0	tmaxx manager i keep getting an e6 n code on my manager, what could be the problem?

01-28-2006, 11:45 AM	#2 (permalink)
DimiXTT Join Date: Oct 16 2005 Location: florida Age: 41 Posts: 46 Rep Power: 0	Re: tmaxx manager an E6 error, the T-max manager is recieving bad value from the 3A timer. Recycle power at the T-max manager, if that doesn't correct the problem. Replace the room timer with a new one. Good luck

01-30-2006, 09:11 AM	#3 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	Re: tmaxx manager Does the E-6 show up on various displays or just one? Try cycling power to each timer in each room then see if the problem goes away. Kevin Barrett ADI Tech Support

01-30-2006, 02:33 PM	#4 (permalink)
summrtan Join Date: Jun 13 2002 Location: N CAL Posts: 433 Rep Power: 7	Re: tmaxx manager A quick question, I am taking over a salon that uses client cards and adnet software with TMax timers, I will be hooking up Helios 11.4 and wanted to know if anything needs to be done to the manager (programming, reset etc) before using Helios? They also have the beds set up to start automatically after 4 minutes, I will not have an auto time set up, do I need to change anything?

01-30-2006, 04:06 PM	#5 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	Re: tmaxx manager Nothing needs to programmed in the Manager. Addresses are stored in the timers in the rooms and are already set. You will install Helios and run it in place of ADNET. The T-Max Manager does not know the difference between ADNET, Helios or any other program. You'll be fine. Kevin Barrett ADI Tech Support

01-30-2006, 04:24 PM	#6 (permalink)
Karstropicalhut Join Date: Sep 30 2004 Location: essex Age: 51 Posts: 5 Rep Power: 0	Re: tmaxx manager just one room on the e6 code what exactly does e6 code mean?

01-31-2006, 04:34 PM	#8 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	Re: tmaxx manager ADNET is the utility we use to test the communications if you can not get Helios to talk. It is not needed for Helios to run. You know your serial port on your T-Max Manager is good because you are using ADNET now. Kevin Barrett ADI Tech Support

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)