T-Max 3A and Sundash R26P Please Help! - Page 2

Bronzingrm · 06-13-2005, 12:24 AM

Thanks again for the additional info.

mr belvedere, I appreciate the offer to talk me through it. I am going into shop sometime tomorrow and will try some of the suggestions out.

Part of my issue is we have one bed, a Sunvision Pro 28 LE, that can only speak T-Max, and another, a Sundash R26-P which can only speak Intellitan due to the age of the boards in it. Unfortunately, the on the Sundash when I go into the paramaters it only goes up to P 20, and then no higher. If you go higher than 20 it just goes back to normal opperation and out of the edit params part. I can try to send P 26 and 27 from the CCS IV and it acts like it is doing something, but from what I understand, to actually change P 27 from Intellitan to T-Max, it must be off the network, and then I would be able to change the rest of the beds to T-Max, and use Adnet 2000 to download the T-Max manager to the CCS IV. But...only if I can get5 thet T-Max 3A to turn the Sundash on and off, or get it to speak Intellitan and turn the Sunvision on and off.

Well, I will try some things tomorrow and also talk to a tech to see if it doesnt work if I do in fact need the SIP timer instead of the 3A.

I will post more when I see what happens tryin to plug it into the RJ11 and 22 jacks as ergo suggests.

Thanks for the input guys.

Bronzingrm · 06-14-2005, 07:53 PM

Well,

I got the 3a to work with the sundash R-26 P. I removed the power board under the head completely and used the leads from J3 to go to the outer two terminals on the power harness that goes to that board normaly to the board (Red and Black)and that works with the 3a

BUT.....Bad part is I switched all the other beds over to T-Max protocol now, and then in ADNET 2000 I used the "download program from PC to Manager" comand to turn CCS IV from Intellitan protocol to T-max, and now it wont see ANY of the beds! And I cant seem to make it work with even just one bed on chain. Any help much appreciated as I dont have any sopftware to switch the CCS IV back to Intellitan and cant find any online!

HELP!!

ergo · 06-17-2005, 12:21 PM

You will need to edit Parameter 27 to 1 on the beds that will alow this..That is t-max protocol...26 is for tpi..Make sure all room address are still there param 5 ...Aplied digital has the software on their site to download ...

ergo · 06-17-2005, 12:23 PM

http://www.appdig.com/tmaxold.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sundash Beds For Sale	maxtanning	For Sale	0	06-25-2005 09:54 PM
Help! buying a bed tonight!!!!!	socalcouple	Open Forum	19	05-21-2005 07:11 AM
SUNDASH EQUIPMENT FOR SALE	SUN	For Sale	1	04-30-2004 03:33 PM
Sundash and Montego Bay	Jason E	For Sale	2	01-15-2004 01:45 PM
SUNDASH R26P	ALOHATANCA	For Sale	8	12-12-2003 03:30 PM

06-13-2005, 12:24 AM	#11 (permalink)
Bronzingrm Waiting Confirmation Join Date: Aug 9 2004 Posts: 28 Rep Power: 0	Thanks again for the additional info. mr belvedere, I appreciate the offer to talk me through it. I am going into shop sometime tomorrow and will try some of the suggestions out. Part of my issue is we have one bed, a Sunvision Pro 28 LE, that can only speak T-Max, and another, a Sundash R26-P which can only speak Intellitan due to the age of the boards in it. Unfortunately, the on the Sundash when I go into the paramaters it only goes up to P 20, and then no higher. If you go higher than 20 it just goes back to normal opperation and out of the edit params part. I can try to send P 26 and 27 from the CCS IV and it acts like it is doing something, but from what I understand, to actually change P 27 from Intellitan to T-Max, it must be off the network, and then I would be able to change the rest of the beds to T-Max, and use Adnet 2000 to download the T-Max manager to the CCS IV. But...only if I can get5 thet T-Max 3A to turn the Sundash on and off, or get it to speak Intellitan and turn the Sunvision on and off. Well, I will try some things tomorrow and also talk to a tech to see if it doesnt work if I do in fact need the SIP timer instead of the 3A. I will post more when I see what happens tryin to plug it into the RJ11 and 22 jacks as ergo suggests. Thanks for the input guys.

06-14-2005, 07:53 PM	#12 (permalink)
Bronzingrm Waiting Confirmation Join Date: Aug 9 2004 Posts: 28 Rep Power: 0	Well, I got the 3a to work with the sundash R-26 P. I removed the power board under the head completely and used the leads from J3 to go to the outer two terminals on the power harness that goes to that board normaly to the board (Red and Black)and that works with the 3a BUT.....Bad part is I switched all the other beds over to T-Max protocol now, and then in ADNET 2000 I used the "download program from PC to Manager" comand to turn CCS IV from Intellitan protocol to T-max, and now it wont see ANY of the beds! And I cant seem to make it work with even just one bed on chain. Any help much appreciated as I dont have any sopftware to switch the CCS IV back to Intellitan and cant find any online! HELP!!

06-17-2005, 12:21 PM	#13 (permalink)
ergo Join Date: Aug 17 2001 Location: Western Ny Age: 39 Posts: 256 Rep Power: 8	You will need to edit Parameter 27 to 1 on the beds that will alow this..That is t-max protocol...26 is for tpi..Make sure all room address are still there param 5 ...Aplied digital has the software on their site to download ...

06-17-2005, 12:23 PM	#14 (permalink)
ergo Join Date: Aug 17 2001 Location: Western Ny Age: 39 Posts: 256 Rep Power: 8	http://www.appdig.com/tmaxold.html

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)