Tmax isn\'t communicating to one of our beds - Page 3

arubagals · 05-28-2005, 09:38 PM

Thanks for all the input! Figured it out! The bed triped the circuit it is tied to and therefore... no power to the bed then no power to the TMax. I flipped the circuit breaker and viola! it came back to life. Whew! Saved me a service call!

MATT A · 05-28-2005, 10:33 PM

Minor

ja · 06-11-2005, 10:42 AM

hi , anyone know why my tanning bed wont turn on? i just had two electricians out to install 220 to my house for a bed and the bulbs are not turning on. the fan wont come on either. i dont have the timer hooked up nor do i know how to hook it up. could that be the problem? seems like i should be able to turn it on by using the timer on the bed.

ja · 06-11-2005, 10:43 AM

navigatin 1 can you help???

navigatin1 · 06-11-2005, 11:50 AM

I'll try. What kind of bed is it and are any of the controls lighting up on the bed indicating that there is power going to it?

Neon Beach · 06-11-2005, 04:41 PM

Turn the breaker on at the electrical panel.

ja · 06-11-2005, 11:04 PM

yes the bed does have power it is a sunsource 5000. the only thing that lights up is the timer on the bed it counts the time down but the lights never come on. someone said something about the wiring being possibly disconnected. who knows how to get to that though???

ja · 06-11-2005, 11:08 PM

there is a small black thing with it that says 3a on it does that mean anything to anyone??? is that tmax? the only thing i have that says tmax is the actual timer on the bed which does light up and count the time down the lights just wont go on. the little black thing plugs to the back of the bed.??? but what it does i dont know.

mr belvedere · 06-12-2005, 08:29 PM

Who's the mfr? Chances are you either need some sort of bybass, or there is a paramater on the board that needs to be change to enable manual operation? When you say time is ticking down, do you mean time on the t-max 3a, or is the time ticking down on a display that is attached to the bed? Must ... have ... data ... error ... error!

tanman0302 · 07-22-2005, 07:53 AM

COMMUNICATION CHIP ON THE BACK OF THE 3A(WALL TIMER) COULD BE BAD...THIS WOULD NOT BREAK THE DAISY CHAIN, JUST SIMPLY STOP THAT ONE TIMER FROM COMMUNICATING WITH THE MANAGER.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3 MAGICTAN SPRAY BOOTHS AND 6 OTHER TANNING BEDS FOR SALE MAKE OFFER	ParadiseTanning	For Sale	16	05-05-2008 08:43 AM
TMax with older Sundash Beds	javajunkienc	Technology Forum	9	02-27-2008 08:36 PM
Looking to relamp my Ovation 134 - 20 minute -	Hotrocks	Equipment	10	09-21-2005 01:15 PM

05-28-2005, 09:38 PM	#21 (permalink)
arubagals Join Date: Dec 14 2004 Posts: 20 Rep Power: 0	Thanks for all the input! Figured it out! The bed triped the circuit it is tied to and therefore... no power to the bed then no power to the TMax. I flipped the circuit breaker and viola! it came back to life. Whew! Saved me a service call!

05-28-2005, 10:33 PM	#22 (permalink)
MATT A Police Department Join Date: Sep 6 2004 Location: Awaiting Posts: 15,371 Rep Power: 30	Minor

06-11-2005, 10:42 AM	#23 (permalink)
ja Join Date: Jun 11 2005 Posts: 18 Rep Power: 0	hi , anyone know why my tanning bed wont turn on? i just had two electricians out to install 220 to my house for a bed and the bulbs are not turning on. the fan wont come on either. i dont have the timer hooked up nor do i know how to hook it up. could that be the problem? seems like i should be able to turn it on by using the timer on the bed.

06-11-2005, 10:43 AM	#24 (permalink)
ja Join Date: Jun 11 2005 Posts: 18 Rep Power: 0	navigatin 1 can you help???

06-11-2005, 11:50 AM	#25 (permalink)
navigatin1 Derf's My *****! Join Date: Aug 17 2004 Posts: 1,865 Rep Power: 5	I'll try. What kind of bed is it and are any of the controls lighting up on the bed indicating that there is power going to it?

06-11-2005, 04:41 PM	#26 (permalink)
Neon Beach I'm Banned Join Date: Nov 30 2000 Location: Ontario Age: 45 Posts: 52,065 Rep Power: 0	Turn the breaker on at the electrical panel.

06-11-2005, 11:04 PM	#27 (permalink)
ja Join Date: Jun 11 2005 Posts: 18 Rep Power: 0	yes the bed does have power it is a sunsource 5000. the only thing that lights up is the timer on the bed it counts the time down but the lights never come on. someone said something about the wiring being possibly disconnected. who knows how to get to that though???

06-11-2005, 11:08 PM	#28 (permalink)
ja Join Date: Jun 11 2005 Posts: 18 Rep Power: 0	there is a small black thing with it that says 3a on it does that mean anything to anyone??? is that tmax? the only thing i have that says tmax is the actual timer on the bed which does light up and count the time down the lights just wont go on. the little black thing plugs to the back of the bed.??? but what it does i dont know.

06-12-2005, 08:29 PM	#29 (permalink)
mr belvedere DERFERATOR Join Date: May 10 2005 Age: 38 Posts: 8,426 Rep Power: 52	Who's the mfr? Chances are you either need some sort of bybass, or there is a paramater on the board that needs to be change to enable manual operation? When you say time is ticking down, do you mean time on the t-max 3a, or is the time ticking down on a display that is attached to the bed? Must ... have ... data ... error ... error!

07-22-2005, 07:53 AM	#30 (permalink)
tanman0302 Join Date: Jul 13 2002 Location: CT Age: 36 Posts: 781 Rep Power: 9	COMMUNICATION CHIP ON THE BACK OF THE 3A(WALL TIMER) COULD BE BAD...THIS WOULD NOT BREAK THE DAISY CHAIN, JUST SIMPLY STOP THAT ONE TIMER FROM COMMUNICATING WITH THE MANAGER.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)