R-32 SunDash and Tmax Manager pro

mike_PA · 03-03-2005, 02:50 PM

Can i connect Tmax Manager pro directly to my sundash r32 - 7 y.o. or do i need to buy an extra Tmax 3a timer to link sundash r32 with tmax manager pro?

sunsally · 03-03-2005, 03:44 PM

See another post in this section. Older than 1996 require the 3A, later models have the timers built-in

Neon Beach · 03-03-2005, 04:04 PM

Either way, I'm sure you need a "remote" timer. The manager is used to set timers, and not act as a timer itself. In other words, if the bed doesn't have a built in T-Max, you'll need a wall mounted 3A.

_________________
"If every instinct you have is wrong, then the opposite would have to be right."
- Jerry, to George, in "The Opposite" [ This Message was edited by: Neon Beach on 2005-03-03 16:06 ]

Dan Boone, ADI · 03-03-2005, 05:14 PM

A seven year old 232 bed (circa 1997 ~ 1998) should speak T-Max.
Set parameter #5 to the bed address & parameter #27 to 1 (T-Max mode).

Dan

mike_PA · 03-03-2005, 09:42 PM

this bed has only 19 parameters. I heard that i can upgrade the timer software on the bed. Is it really possible?

Dan Boone, ADI · 03-04-2005, 07:55 AM

If the timer only goes up to parameter 19, it will not speak T-Max.

There is no way to upgrade the software.

Dan

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TMax with older Sundash Beds	javajunkienc	Technology Forum	9	02-27-2008 08:36 PM
Who has actually had trouble with ETS?	WendyJo	Open Forum	28	07-28-2005 04:36 PM
How Do U Hook up a Tmax Timer to a Single Bed	nailsbykelley	Technology Forum	3	08-26-2003 12:55 PM

03-03-2005, 02:50 PM	#1 (permalink)
mike_PA Join Date: May 3 2004 Posts: 60 Rep Power: 0	Can i connect Tmax Manager pro directly to my sundash r32 - 7 y.o. or do i need to buy an extra Tmax 3a timer to link sundash r32 with tmax manager pro?

03-03-2005, 03:44 PM	#2 (permalink)
sunsally www.highlinecapital.com Join Date: Nov 23 2004 Location: ITA Member & Berman Supporter! Posts: 2,484 Rep Power: 8	See another post in this section. Older than 1996 require the 3A, later models have the timers built-in

03-03-2005, 04:04 PM	#3 (permalink)
Neon Beach I'm Banned Join Date: Nov 30 2000 Location: Ontario Age: 45 Posts: 52,065 Rep Power: 0	Either way, I'm sure you need a "remote" timer. The manager is used to set timers, and not act as a timer itself. In other words, if the bed doesn't have a built in T-Max, you'll need a wall mounted 3A. _________________ "If every instinct you have is wrong, then the opposite would have to be right." - Jerry, to George, in "The Opposite" [ This Message was edited by: Neon Beach on 2005-03-03 16:06 ]

03-03-2005, 05:14 PM	#4 (permalink)
Dan Boone, ADI Join Date: Jul 6 2001 Posts: 70 Rep Power: 0	A seven year old 232 bed (circa 1997 ~ 1998) should speak T-Max. Set parameter #5 to the bed address & parameter #27 to 1 (T-Max mode). Dan

03-03-2005, 09:42 PM	#5 (permalink)
mike_PA Join Date: May 3 2004 Posts: 60 Rep Power: 0	this bed has only 19 parameters. I heard that i can upgrade the timer software on the bed. Is it really possible?

03-04-2005, 07:55 AM	#6 (permalink)
Dan Boone, ADI Join Date: Jul 6 2001 Posts: 70 Rep Power: 0	If the timer only goes up to parameter 19, it will not speak T-Max. There is no way to upgrade the software. Dan

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)