Sun Dome with less than 5 hrs has 10 bulbs out already

Hoot81 · 02-28-2005, 05:56 PM

Hey its me again...
I was wondering if any of you have had trouble with the bulbs in your sun dome with 48 bulbs?
My sun dome has less than 5 hours on it and today we found 10 bulbs that were already out on it.
6 of the bulbs are on one panel section, and the other 4 are random.
What are your thoughts on this?
Thanks
Joyce

engfant · 02-28-2005, 06:10 PM

What kind of lamps/starters are you using? (don't say what came with it. Need names/numbers)

pam · 02-28-2005, 07:51 PM

I had one panel of my Sundome that didn't light when I first got it and it was because something wasn't wired right. That was a few years ago though and I don't remember the specifics. I know it required a service call under warranty.

sunsally · 02-28-2005, 10:13 PM

When it is two together, it is often a loose wire (or unattached wire) to the ballast issue.

When they are just one alone, often a blown socket (look and see if it looks burnt).

But with a new bed, the most common issue is "settling" where they jiggle out of place just slightly after the bed is installed and fired up several times.

Trying taking out/putting back the lamps in question.

If that doesn't work, call your disty/manuf and have them walk you through checking the ballast wires and/or sockets.

Hoot81 · 03-01-2005, 07:20 AM

The bulbs are 160 wt Bronzing Sun from Wolf. the numbers on the bulb are
HG B751 T12 160W VSRB1 the last 3 are either pin or bin
The bed is a Sundome 548 V

gofis · 03-03-2005, 12:26 AM

If its still under warranty, call ETS and they will send someone out to fix it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tanning lamps / bulbs	Mr. Repeat	Open Forum	1	06-01-2005 11:40 PM
tanning lamps / bulbs	ricky13	Open Forum	0	11-17-2004 05:45 PM
mixing bulbs	bikergal	Open Forum	7	07-17-2004 04:47 PM

02-28-2005, 05:56 PM	#1 (permalink)
Hoot81 Join Date: Jan 7 2005 Posts: 15 Rep Power: 0	Hey its me again... I was wondering if any of you have had trouble with the bulbs in your sun dome with 48 bulbs? My sun dome has less than 5 hours on it and today we found 10 bulbs that were already out on it. 6 of the bulbs are on one panel section, and the other 4 are random. What are your thoughts on this? Thanks Joyce

02-28-2005, 06:10 PM	#2 (permalink)
engfant FREE ENGFANTUCATION Join Date: May 20 2003 Posts: 8,956 Rep Power: 12	What kind of lamps/starters are you using? (don't say what came with it. Need names/numbers)

02-28-2005, 07:51 PM	#3 (permalink)
pam Police Department Join Date: Oct 29 2001 Location: USA Posts: 5,036 Rep Power: 9	I had one panel of my Sundome that didn't light when I first got it and it was because something wasn't wired right. That was a few years ago though and I don't remember the specifics. I know it required a service call under warranty.

02-28-2005, 10:13 PM	#4 (permalink)
sunsally www.highlinecapital.com Join Date: Nov 23 2004 Location: ITA Member & Berman Supporter! Posts: 2,512 Rep Power: 8	When it is two together, it is often a loose wire (or unattached wire) to the ballast issue. When they are just one alone, often a blown socket (look and see if it looks burnt). But with a new bed, the most common issue is "settling" where they jiggle out of place just slightly after the bed is installed and fired up several times. Trying taking out/putting back the lamps in question. If that doesn't work, call your disty/manuf and have them walk you through checking the ballast wires and/or sockets.

03-01-2005, 07:20 AM	#5 (permalink)
Hoot81 Join Date: Jan 7 2005 Posts: 15 Rep Power: 0	The bulbs are 160 wt Bronzing Sun from Wolf. the numbers on the bulb are HG B751 T12 160W VSRB1 the last 3 are either pin or bin The bed is a Sundome 548 V

03-03-2005, 12:26 AM	#6 (permalink)
gofis Join Date: Aug 26 2004 Location: US Posts: 34 Rep Power: 0	If its still under warranty, call ETS and they will send someone out to fix it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)