Looking for a manual for a Sun Star Zx32T - tanTALK

tammy tan Lines · 01-12-2005, 08:22 PM

Getting a message flashing E-7 and an alarm going off, no idea what it is wondering if anyone would have an idea where I can get a manual to help me locate the problem. Thanks!

Neon Beach · 01-12-2005, 09:02 PM

Have you checked their website? Many manufacturers with sites will have a troubleshooting area.

tammy tan Lines · 01-13-2005, 09:31 AM

I did look at a few places on line and I did email some technical questions still no word back and I'm still getting the error message and my bed is still down, not a good time when it's the busy season. Any info would help. I did disc. from the T-Max timer and the bed still has the same error so it's the bed.

West Side Tanner · 01-13-2005, 01:49 PM

http://www.etstans.com
Did you turn the breaker "off" then back "on", to reset the bed?

_________________
[ This Message was edited by: West Side Tanner on 2005-01-13 13:51 ]

timetotann · 01-13-2005, 03:28 PM

I have a manual for a sunstar zx 32T My bed is a 2000, I called ETS and they sent me one. In the trouble shooting section It says Er 7 Face tanner contactor is closed when it should be open, have service tech check contactor. It does not say anything about the alarm..

susieq_007 · 03-19-2009, 10:23 PM

Quote:

Originally Posted by tammy tan Lines

Getting a message flashing E-7 and an alarm going off, no idea what it is wondering if anyone would have an idea where I can get a manual to help me locate the problem. Thanks!

I just bought a sunstar 32zx and it worked the first time fine, now when the timer goes off it clicks, and then the bed stays running and the fans never seem to shut off unless you trip the breaker?? Any ideas??
please help

Spellbound · 03-21-2009, 08:22 PM

Tammy-E7 is a communication problem. I just had this problem fixed in one of my sunstars. All you should need is a communication chip located in the top of your bed. Contact Brian Oshman from the Sun Doctor & he can send you one. Before that, though, make sure all your lines are hooked up correctly & so on. Flipping the circuit breaker should fix the alarm sound(my starpower did that, too). If it's not in the bed, it's in the tmax. You also need to make sure that is the bed that is causing the E7. I took my bed off the daisy chain w/the tmax to make sure it was the right bed-no more E7. the first bed I disconnected, the E7 still showed up, so you need to be sure. taking the tops off & putting them back on are a pain in the arse.

03-21-2009, 08:22 PM	#7 (permalink)
Spellbound Join Date: Jul 2 2008 Location: DE Posts: 62 Rep Power: 0	Re: Looking for a manual for a Sun Star Zx32T Tammy-E7 is a communication problem. I just had this problem fixed in one of my sunstars. All you should need is a communication chip located in the top of your bed. Contact Brian Oshman from the Sun Doctor & he can send you one. Before that, though, make sure all your lines are hooked up correctly & so on. Flipping the circuit breaker should fix the alarm sound(my starpower did that, too). If it's not in the bed, it's in the tmax. You also need to make sure that is the bed that is causing the E7. I took my bed off the daisy chain w/the tmax to make sure it was the right bed-no more E7. the first bed I disconnected, the E7 still showed up, so you need to be sure. taking the tops off & putting them back on are a pain in the arse.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Operations Manual Outline - Request for comments	Tommy	General Tanning Industry Discussions	2	09-15-2005 04:33 PM
!!HEY NOW your a ..ROCK STAR!!	bronzed_hunnybunz_xoxo	Tanning Lotion Buzz	4	04-01-2005 09:04 PM
HELIOS-POS Receipt Issue-A Fix!	Andy	Technology Forum	11	08-27-2002 12:55 PM
Employee Theft (Bronze Star???)	Wizard	General Tanning Industry Discussions	39	07-27-2002 09:44 AM
The Bronze Star protection force!	Soakinuptherays	Say What ?????	2	12-05-2001 03:35 PM

01-12-2005, 08:22 PM	#1 (permalink)
tammy tan Lines Join Date: Jan 12 2005 Posts: 7 Rep Power: 0	Getting a message flashing E-7 and an alarm going off, no idea what it is wondering if anyone would have an idea where I can get a manual to help me locate the problem. Thanks!

01-12-2005, 09:02 PM	#2 (permalink)
Neon Beach Join Date: Nov 30 2000 Location: Ontario Age: 61 Posts: 38,594 Rep Power: 107	Have you checked their website? Many manufacturers with sites will have a troubleshooting area.

01-13-2005, 09:31 AM	#3 (permalink)
tammy tan Lines Join Date: Jan 12 2005 Posts: 7 Rep Power: 0	I did look at a few places on line and I did email some technical questions still no word back and I'm still getting the error message and my bed is still down, not a good time when it's the busy season. Any info would help. I did disc. from the T-Max timer and the bed still has the same error so it's the bed.

01-13-2005, 01:49 PM	#4 (permalink)
West Side Tanner Join Date: Dec 27 2003 Location: Florida Posts: 1,818 Rep Power: 21	http://www.etstans.com Did you turn the breaker "off" then back "on", to reset the bed? _________________ [ This Message was edited by: West Side Tanner on 2005-01-13 13:51 ]

01-13-2005, 03:28 PM	#5 (permalink)
timetotann Join Date: Aug 23 2004 Posts: 359 Rep Power: 20	I have a manual for a sunstar zx 32T My bed is a 2000, I called ETS and they sent me one. In the trouble shooting section It says Er 7 Face tanner contactor is closed when it should be open, have service tech check contactor. It does not say anything about the alarm..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)