T-Max problems

SLI-HOT · 09-30-2003, 02:14 PM

Added a ProSun bed in between ETS beds using a T-Max 3a and ManagerPro went nuts.

Took out 3a and spliced line together, ManagerPro went nuts.

Unplugged next bed down and everything before is ok.

What did I do to the lines at the new bed?

Bartman

rebecca · 10-01-2003, 12:32 PM

When you add a 3A in the line, it is recommended that you set the address on the 3A before connecting in the daisy chain. That way there will be no conflicts in address with other beds. I suspect that is why your Manager Pro went nuts when you connected the 3A. What you will want to do first is set the address on the 3A timer, replace the cables you spliced (these are data lines and splicing will cause communication errors), then rescan your manager with everything connected. Feel free to call ADI Tech Support at 417-338-5101 if you need assistance.

SLI-HOT · 10-15-2003, 04:35 PM

Thanks for the reply Rebecca, I did all that, the problem was that the electrician pulled my data cable on the last bed in the chain through the 220V plug wires. It was actually wrapped around one of the leads, the 3A had nothing to do with it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dr. Kern\'s Blue Dream - Problems!	Chris Is Tan	Equipment	68	07-26-2007 07:13 AM
Drugs Affedted by....	tan2much	Health & Fitness	37	12-12-2006 12:30 AM
Tingle problems	pinktink	Skin Care	7	07-30-2005 03:46 PM
Helios 9.20 still has same report problems	Fred	Technology Forum	13	02-13-2001 03:55 PM

09-30-2003, 02:14 PM	#1 (permalink)
SLI-HOT Join Date: Feb 5 2002 Posts: 105 Rep Power: 0	Added a ProSun bed in between ETS beds using a T-Max 3a and ManagerPro went nuts. Took out 3a and spliced line together, ManagerPro went nuts. Unplugged next bed down and everything before is ok. What did I do to the lines at the new bed? Bartman

10-01-2003, 12:32 PM	#2 (permalink)
rebecca Join Date: Jun 14 2002 Posts: 2 Rep Power: 0	When you add a 3A in the line, it is recommended that you set the address on the 3A before connecting in the daisy chain. That way there will be no conflicts in address with other beds. I suspect that is why your Manager Pro went nuts when you connected the 3A. What you will want to do first is set the address on the 3A timer, replace the cables you spliced (these are data lines and splicing will cause communication errors), then rescan your manager with everything connected. Feel free to call ADI Tech Support at 417-338-5101 if you need assistance.

10-15-2003, 04:35 PM	#3 (permalink)
SLI-HOT Join Date: Feb 5 2002 Posts: 105 Rep Power: 0	Thanks for the reply Rebecca, I did all that, the problem was that the electrician pulled my data cable on the last bed in the chain through the 220V plug wires. It was actually wrapped around one of the leads, the 3A had nothing to do with it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)