OK I'm totally clueless how to figure this out. So any help would be appreciated.

We just set up our Suncapsule and it has it's own timer. How can I set it up to run off of my T-max timer that we have in the room, or can it only run off of the Suncapsule timer?

Please help
Angie

The T-Max 3A in the tanning room replaces the Tan Time timer on the tanning bed. Take the two wires that the Tan Time timer is touching together to the J3 Contact screw terminals on the back of the 3A.

Kevin Barrett
ADI Tech Support

Thank You Kevin we knew there had to be an easy way and we were just so overworked that we were not getting it.

Angie

My controler for my suncapsule has a phone jack on the top can I make this my last bed in the loop?

A SINGLE phone jack? What size is it?

If the timer only has a single phone jack, then it is not our timer. You will have to replace that timer with one of ours.

Kevin Barrett
ADI Tech Support

This is what suncapsule emailed me about hooking up to tmax:All you would need from us is an interface that connects our unit to a T-Max
3A switch. This piece is priced at 14.00 plus shipping. You do need a 3A
switch. Unfortunately we do not carry T-Max Product.