T-Max Manager/static elec

schoolboy · 02-26-2003, 04:12 PM

Several times during the last month, the T-Max Manager has recycled after touching the unit while setting the time. It looks like static electricity. Is this possible and what might be the remedy?

Kevin Barrett · 02-26-2003, 07:57 PM

Try grounding the manager. Run a wire from one of the screws on the back of the manager that holds the back on to a grounding point in the building. A screw that holds an outlet plate in is a good grounding point.

Kevin Barrett
ADI Tech Support

schoolboy · 02-27-2003, 03:34 PM

Thanks Kevin, I'll ground it today. 11 months after installation, why now? This problem has not happened before, and Colorado is pretty dry most of the year.
Schoolboy

Kevin Barrett · 02-27-2003, 07:31 PM

It's a bad winter. This is when it happens the worst this time of year.

Kevin Barrett
ADI Tech Support

Teez · 03-03-2003, 01:08 PM

i have been having problems with the manager beeping when nothing is happening. Do you know the cause of this?

Kevin Barrett · 03-04-2003, 02:57 PM

When the mamager beeps, does the display show anything? Does the manager rescan for beds?

Kevin Barrett
ADI Tech Support

BlueEzs007 · 03-04-2003, 10:03 PM

Can anyone tell me if the Helios software can run me a report telling me how many hours were worked by a given employee over the past year.

Andy · 03-04-2003, 11:23 PM

BlueEzs007 ... the above question should be posted as an new topic ... it does not relate to the topic of this thread.

Andy · 03-04-2003, 11:26 PM

Kevin, I was in a salon in St Louis a few weeks back ... they were having the same situation that is being described.

It felt to me as if the beeping was being caused by a fluctuation in power. No change in the status display, just beeping. Tried replacing with a new Manager ... same situation ... intermittant beeping.

BlueEzs007 · 03-05-2003, 09:05 AM

Thanks Andy.....Done

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
elec req\'s	canuckian	Tanning Biz Newbies	17	04-21-2005 01:33 AM
HINO elec co. in TX.... RIP OFF!!!	TXtanner	Open Forum	7	12-17-2004 05:58 PM
demand charge on elec bill. what is it???	TXtanner	Open Forum	15	08-31-2004 01:56 PM
\'demand\' charge on elec. bill. what is it?	TXtanner	Tanning Biz Newbies	6	08-31-2004 01:52 PM
elec. starters	sweettimm	Equipment	4	01-24-2004 10:30 PM

02-26-2003, 04:12 PM	#1 (permalink)
schoolboy Join Date: Apr 23 2001 Posts: 135 Rep Power: 8	Several times during the last month, the T-Max Manager has recycled after touching the unit while setting the time. It looks like static electricity. Is this possible and what might be the remedy?

02-26-2003, 07:57 PM	#2 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	Try grounding the manager. Run a wire from one of the screws on the back of the manager that holds the back on to a grounding point in the building. A screw that holds an outlet plate in is a good grounding point. Kevin Barrett ADI Tech Support

02-27-2003, 03:34 PM	#3 (permalink)
schoolboy Join Date: Apr 23 2001 Posts: 135 Rep Power: 8	Thanks Kevin, I'll ground it today. 11 months after installation, why now? This problem has not happened before, and Colorado is pretty dry most of the year. Schoolboy

02-27-2003, 07:31 PM	#4 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	It's a bad winter. This is when it happens the worst this time of year. Kevin Barrett ADI Tech Support

03-03-2003, 01:08 PM	#5 (permalink)
Teez Join Date: Jan 22 2002 Posts: 375 Rep Power: 7	i have been having problems with the manager beeping when nothing is happening. Do you know the cause of this?

03-04-2003, 02:57 PM	#6 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	When the mamager beeps, does the display show anything? Does the manager rescan for beds? Kevin Barrett ADI Tech Support

03-04-2003, 10:03 PM	#7 (permalink)
BlueEzs007 Join Date: Jul 21 2002 Location: NC Posts: 147 Rep Power: 7	Can anyone tell me if the Helios software can run me a report telling me how many hours were worked by a given employee over the past year.

03-04-2003, 11:23 PM	#8 (permalink)
Andy Join Date: Jan 25 2000 Location: CT Posts: 1,763 Rep Power: 9	BlueEzs007 ... the above question should be posted as an new topic ... it does not relate to the topic of this thread.

03-04-2003, 11:26 PM	#9 (permalink)
Andy Join Date: Jan 25 2000 Location: CT Posts: 1,763 Rep Power: 9	Kevin, I was in a salon in St Louis a few weeks back ... they were having the same situation that is being described. It felt to me as if the beeping was being caused by a fluctuation in power. No change in the status display, just beeping. Tried replacing with a new Manager ... same situation ... intermittant beeping.

03-05-2003, 09:05 AM	#10 (permalink)
BlueEzs007 Join Date: Jul 21 2002 Location: NC Posts: 147 Rep Power: 7	Thanks Andy.....Done

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)