Changing delay minutes

[Ginger]

How do I change the delay time on my T-Max Manager? When I first had it installed, my electrician talked with someone from T-Max & they instructed him how to set the delay at 3 minutes. I would like to change it to 5 minutes.Thanks!Sun City Tans

[Kevin Barrett]

1) Press the Start/Stop buttons under display 1 and Display 8 at the same time until the displays change values. Release the buttons.2) Display 1 will read a 3. Press the Set button under Display 1 until it reads a 5.3) Unplug power to the T-Max Manager and Plug it back in. You now have a 5 minute delay.Kevin BarrettADI Technical Support

[Ginger]

Thanks, Kevin, that was easy enough!One more question. I need to swap 2 rooms. My T-Max for rooms 5 & 6 are backwards. If someone goes in room 6, I have to set the timer on Display 5. Can you instruct me how to change this? If it would be better for me to call, I can do this. I didn't know how complicated it would be.Thanks!Ginger

[Kevin Barrett]

I recommend auto addressing the entire salon. Make sure no one is tanning and each timer is displaying a 0.1) Press the Start/Stop buttons under Display 1 and Display 8 on the T-Max Manager at the same time until the displays change values. Release the buttons.2) Press and release the Start/Stop button under Display number 2. Display 3 will change to a 1. Each timer in the rooms will read a 99 and sound an alarm.3) Go to each room in numeric order (room 1 first, room 2 second and so on) and press the start/stop button on each timer. The alarm should stop and the timer show read a 0. Make sure the timer reads a 0 before you go to the next room.4) After you have completed pressing the buttons in each room, go back to the T-Max Manager and cycle power to it. Your addresses will be set.Let me know if you have any other questions.Kevin BarrettApplied Digital, Inc. Technical Support.

[Ginger]

Thanks again, Kevin! It worked like a charm!