T-Max Manager problem

Adam Cooper · 02-22-2001, 10:41 AM

On one of our 46 bed salons, the manager plus will not show beds 1-17. I can take away power, and when i reapply power, it loads up normally, except the lights for beds 1-17 dont show the yellow color like the other beds, they are just totally blank. Any ideas?Adam Cooper

Adam Cooper · 02-22-2001, 11:08 AM

well, it is currently working. One of the ladies here just pushed the phone-like cord into the manager, and it came up fine. After i inspected the cord, i noticed the little clip that holds it into the manager is broken off. How can i fix this? I cant replace the cord, because it is waaay to long and it is ran throught the walls and everything. I know that at home depot you can buy terminal blocks that have a phone line coming out of them. Could i plug this into the tmax, and cut the connector off the cord and apply those wires to the terminal? would this work?thanks,Adam Cooper

Kevin Barrett · 02-22-2001, 11:39 AM

If you can't replace the cord, you will need to cut the connector off and re-crimp the a new one on it. Make sure that when you crimp the end on, you crimp it the exact same way as the current one is connected.Kevin BarrettADI Tech Support[This message has been edited by Kevin Barrett (edited 02-22-2001).]

Adam Cooper · 02-22-2001, 11:48 AM

Where can i get a crimper and a connector? Radio Shack?

Kevin Barrett · 02-22-2001, 12:02 PM

For the crimper, call Techni-Tool @ 1-800-832-4866 and ask for part number 702ST019. You can also try Radio Shack. They used to carry a cheap plastic model. I recommend the one from Techni-Tool. That's the one that we use.You can get the RJ-22 connectors from Home Depot. Get the one that's called a Hand Set Connector.Kevin BarrettADI Tech Support

Adam Cooper · 02-22-2001, 12:09 PM

thanks.

Adam Cooper · 02-22-2001, 12:17 PM

btw,thanks kevin for replying to all my questions so fast! Just wanted to commend you!thanks,Adam Cooper

Kevin Barrett · 02-22-2001, 01:47 PM

Your welcome! Let me know if you need any more help.Kevin BarrettADI Tech Support

Rich · 02-23-2001, 08:12 AM

I have used the cheap plastic crimpers and they work ok, but you may have to put on a couple of ends before you end up with one that works. Good luck.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Having a major problem with my t-max manager	sunkiss3d	Technology Forum	6	09-16-2004 02:23 PM
tmax manager problem	sshannon	Technology Forum	8	03-22-2002 08:13 AM
manager plus problem.	Adam Cooper	Technology Forum	5	07-17-2001 04:37 PM
Tmax manager problem	Adam Cooper	Technology Forum	2	03-21-2001 11:13 AM

02-22-2001, 10:41 AM	#1 (permalink)
Adam Cooper Join Date: Oct 25 2000 Posts: 365 Rep Power: 9	On one of our 46 bed salons, the manager plus will not show beds 1-17. I can take away power, and when i reapply power, it loads up normally, except the lights for beds 1-17 dont show the yellow color like the other beds, they are just totally blank. Any ideas?Adam Cooper

02-22-2001, 11:08 AM	#2 (permalink)
Adam Cooper Join Date: Oct 25 2000 Posts: 365 Rep Power: 9	well, it is currently working. One of the ladies here just pushed the phone-like cord into the manager, and it came up fine. After i inspected the cord, i noticed the little clip that holds it into the manager is broken off. How can i fix this? I cant replace the cord, because it is waaay to long and it is ran throught the walls and everything. I know that at home depot you can buy terminal blocks that have a phone line coming out of them. Could i plug this into the tmax, and cut the connector off the cord and apply those wires to the terminal? would this work?thanks,Adam Cooper

02-22-2001, 11:39 AM	#3 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	If you can't replace the cord, you will need to cut the connector off and re-crimp the a new one on it. Make sure that when you crimp the end on, you crimp it the exact same way as the current one is connected.Kevin BarrettADI Tech Support[This message has been edited by Kevin Barrett (edited 02-22-2001).]

02-22-2001, 11:48 AM	#4 (permalink)
Adam Cooper Join Date: Oct 25 2000 Posts: 365 Rep Power: 9	Where can i get a crimper and a connector? Radio Shack?

02-22-2001, 12:02 PM	#5 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	For the crimper, call Techni-Tool @ 1-800-832-4866 and ask for part number 702ST019. You can also try Radio Shack. They used to carry a cheap plastic model. I recommend the one from Techni-Tool. That's the one that we use.You can get the RJ-22 connectors from Home Depot. Get the one that's called a Hand Set Connector.Kevin BarrettADI Tech Support

02-22-2001, 12:09 PM	#6 (permalink)
Adam Cooper Join Date: Oct 25 2000 Posts: 365 Rep Power: 9	thanks.

02-22-2001, 12:17 PM	#7 (permalink)
Adam Cooper Join Date: Oct 25 2000 Posts: 365 Rep Power: 9	btw,thanks kevin for replying to all my questions so fast! Just wanted to commend you!thanks,Adam Cooper

02-22-2001, 01:47 PM	#8 (permalink)
Kevin Barrett Join Date: Jan 26 2000 Location: Branson West, MO Age: 42 Posts: 210 Rep Power: 9	Your welcome! Let me know if you need any more help.Kevin BarrettADI Tech Support

02-23-2001, 08:12 AM	#9 (permalink)
Rich Join Date: Jan 27 2000 Location: Topeka Kansas Age: 52 Posts: 486 Rep Power: 9	I have used the cheap plastic crimpers and they work ok, but you may have to put on a couple of ends before you end up with one that works. Good luck.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)