T Max Pro not reading 1 bed - tanTALK

GBoucher · 10-27-2014, 10:21 AM

When i opened this morning one of my booths which is #7 was lite in orange and buzzing. I unplugged the timer connector and reconnected it to reset the timer. Now it is not reading #7 at all , just blank like its not even hooked up. Not sure if it's the timer itself in the booth or what.

Any help would be great..

tanu01 · 10-27-2014, 01:27 PM

Did you try to re-program the unit ? (tell it who it is again)

GBoucher · 10-27-2014, 02:52 PM

You mean program the booth itself? I'm not sure how to do that.

Its a Sun Capsule Lightstream

tanu01 · 10-27-2014, 02:54 PM

is it t max ready or on a 3a ?

GBoucher · 10-27-2014, 05:26 PM

Quote:

Originally Posted by tanu01

is it t max ready or on a 3a ?

Yes its on a 3A timer with a T Max Manager Pro main board

tanu01 · 10-27-2014, 06:11 PM

My GUESS would be that the lost its address or has gone bad, could try a new chip in the 3a.

suncitypembroke · 10-27-2014, 10:42 PM

you loss power at the timer, meaning the transformer came up plug or connection not tight....

GBoucher · 10-29-2014, 12:43 PM

I fixed it. I just disconnected the power wires in back of 3A timer, reconnected and now it reads it..

Thanks again for suggestions!!!!

10-27-2014, 10:21 AM	#1 (permalink)
GBoucher Join Date: Jul 9 2013 Location: Ma. Posts: 87 Rep Power: 0	T Max Pro not reading 1 bed When i opened this morning one of my booths which is #7 was lite in orange and buzzing. I unplugged the timer connector and reconnected it to reset the timer. Now it is not reading #7 at all , just blank like its not even hooked up. Not sure if it's the timer itself in the booth or what. Any help would be great..

10-27-2014, 01:27 PM	#2 (permalink)
tanu01 "The Man" Join Date: Mar 4 2003 Location: ohio Posts: 4,015 Rep Power: 23	Re: T Max Pro not reading 1 bed Did you try to re-program the unit ? (tell it who it is again)

10-27-2014, 02:52 PM	#3 (permalink)
GBoucher Join Date: Jul 9 2013 Location: Ma. Posts: 87 Rep Power: 0	Re: T Max Pro not reading 1 bed You mean program the booth itself? I'm not sure how to do that. Its a Sun Capsule Lightstream

10-27-2014, 02:54 PM	#4 (permalink)
tanu01 "The Man" Join Date: Mar 4 2003 Location: ohio Posts: 4,015 Rep Power: 23	Re: T Max Pro not reading 1 bed is it t max ready or on a 3a ?

10-27-2014, 06:11 PM	#6 (permalink)
tanu01 "The Man" Join Date: Mar 4 2003 Location: ohio Posts: 4,015 Rep Power: 23	Re: T Max Pro not reading 1 bed My GUESS would be that the lost its address or has gone bad, could try a new chip in the 3a.

10-27-2014, 10:42 PM	#7 (permalink)
suncitypembroke Join Date: Apr 21 2004 Location: Mass. Posts: 698 Rep Power: 21	Re: T Max Pro not reading 1 bed you loss power at the timer, meaning the transformer came up plug or connection not tight....

10-29-2014, 12:43 PM	#8 (permalink)
GBoucher Join Date: Jul 9 2013 Location: Ma. Posts: 87 Rep Power: 0	Re: T Max Pro not reading 1 bed I fixed it. I just disconnected the power wires in back of 3A timer, reconnected and now it reads it.. Thanks again for suggestions!!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T Max pro not reading one bed	GBoucher	Sun Doctors	5	09-02-2013 10:32 PM
5.0 meter reading	sunnie side up	Tanning Lamps	22	01-13-2012 04:56 PM
spectrometer reading?	Jeremy McHargue	New To The Tanning Business	0	07-28-2010 06:45 PM
You will enjoy reading this	Don Smith	The Benefits of UV Light	4	10-24-2008 12:02 PM
MUST READING!: How Much Sun Is Too Much?	Don Smith	Tanning Salon Management	4	08-27-2002 09:20 AM