T-max manager help - tanTALK

ashleitans · 06-16-2014, 03:36 PM

I recently bought a t-max manager due to the fact my individual timers are getting old.
My question is this:
Can I daisy chain the beds together without the need of an additional timer in the room? I have 2 daisy chained together and they work fine, but for some reason I can't connect my third or fourth bed up? Any suggestions? The length between bed 2 & 3 is about 60 feet when you leave a little slack in the line so I bought a 100 foot t-max cable, but still nothing.

tanu01 · 06-16-2014, 03:51 PM

depends on the beds,some are tmax ready and some are not. if not, you will need a 3A

ashleitans · 06-16-2014, 03:57 PM

Beds 2 & 3 are exactly the same but 4 is different and it says in the manual it is t-max ready as it is actually quite newer. Is the distance between the two beds too far to carry the signal?
When I connect them I change the bed id to 3 and 4 but it still picks nothing up past 2.
I appreciate any help anyone can give.

tanu01 · 06-17-2014, 08:04 AM

you need to disconnect the bed from the tmax,no wires in the back. kill the power to the bed, then power back up and reprogram the bed to the proper ID

Tan till Dawn · 07-18-2014, 10:53 PM

I have all mine daisy chained. All have timer boxes on the wall. Two turn on directly on the bed. Of course it helped that it was set up already but soon after I purchased the salon there was a break in the chain. We had to rewire the entire salon and it was fine after

06-16-2014, 03:36 PM	#1 (permalink)
ashleitans Join Date: Apr 27 2014 Location: Pennsylvania Posts: 7 Rep Power: 0	T-max manager help I recently bought a t-max manager due to the fact my individual timers are getting old. My question is this: Can I daisy chain the beds together without the need of an additional timer in the room? I have 2 daisy chained together and they work fine, but for some reason I can't connect my third or fourth bed up? Any suggestions? The length between bed 2 & 3 is about 60 feet when you leave a little slack in the line so I bought a 100 foot t-max cable, but still nothing.

06-16-2014, 03:51 PM	#2 (permalink)
tanu01 "The Man" Join Date: Mar 4 2003 Location: ohio Posts: 4,015 Rep Power: 23	Re: T-max manager help depends on the beds,some are tmax ready and some are not. if not, you will need a 3A

06-16-2014, 03:57 PM	#3 (permalink)
ashleitans Join Date: Apr 27 2014 Location: Pennsylvania Posts: 7 Rep Power: 0	Re: T-max manager help Beds 2 & 3 are exactly the same but 4 is different and it says in the manual it is t-max ready as it is actually quite newer. Is the distance between the two beds too far to carry the signal? When I connect them I change the bed id to 3 and 4 but it still picks nothing up past 2. I appreciate any help anyone can give.

06-17-2014, 08:04 AM	#4 (permalink)
tanu01 "The Man" Join Date: Mar 4 2003 Location: ohio Posts: 4,015 Rep Power: 23	Re: T-max manager help you need to disconnect the bed from the tmax,no wires in the back. kill the power to the bed, then power back up and reprogram the bed to the proper ID

07-18-2014, 10:53 PM	#5 (permalink)
Tan till Dawn Join Date: Aug 2 2011 Location: New Jersey Posts: 11 Rep Power: 0	Re: T-max manager help I have all mine daisy chained. All have timer boxes on the wall. Two turn on directly on the bed. Of course it helped that it was set up already but soon after I purchased the salon there was a break in the chain. We had to rewire the entire salon and it was fine after

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TMax Manager, TMax Manager Pro, 3 Timers	trlkidd	For Sale - FOR SALON OWNERS ONLY	16	01-25-2013 04:08 PM
Need 7 t-max and a manager	Mario35	For Sale - FOR SALON OWNERS ONLY	12	08-22-2005 10:03 PM
looking for tmax manager or manager pro	mjhoster	For Sale - FOR SALON OWNERS ONLY	2	01-28-2005 10:41 AM
NEW T-MAX MANAGER PRO	als22	For Sale - FOR SALON OWNERS ONLY	5	12-10-2004 03:18 PM
manager help?	sweettimm	Tanning Salon Management	8	10-31-2004 09:11 PM