verygc

I just recently well 9mths ago bought a tanning salon and Im just wondering how you check how many hours the bed has done? I have Soltron Z-45 Turbo beds. I would check the manual but the lady i bought it from didnt have manuals so Im a little lost. I was told that if you press the right buttons that it will show it in the display..

Does anyone know?

tanmansonny

The parameter in the timer display is parameter 19 for the total hours accumulated. You first hold down the up and down arrows simltaneousley, then the colon : will dissappear. Then press reset the zeros will start blinking. Then press the up arrow to 102. Then start and then press the up arrow , then go to p19 and it will display the hours. It sounds complex , it is not. You can call Ergoline at 800 643 0086, and they can walk you through it no problem. There is also an hour meter somewhere near the ballast tray or where the power goes into the bed. Ergoline can tell you where it is. Also the manuals are available online , as I have accessed them before. Just ask when you call. I have a ton of Soltron equipment in my 4 salons, good stuff...

verygc

Hi thankyou. But i have absolutly no idea what your talking about. Near the display screen there is a picture of a bed with a button, then a picture of a cooling fan with two buttons and heat option with two buttons. None of these buttons do anything.. Thankyou for your help but i think im screwed lol

tanmansonny

can you call 1-800-643-0086?