Need Tech support and parts for Atlantis 205 - tanTALK

gofis · 02-07-2006, 04:04 PM

Have an Atlantis 205 that just would not start. It has power to the display (00).

Help!!!!

thanx

Jason E · 02-08-2006, 09:23 AM

Good Luck, parts are a ****** to find for this bed the only place that has them is Heartland because of the Merge. At least that is the only place I found them.

The bed is made by KBL you can buy parts from them but delivery was more than the parts so you have to order alot for it to make sense

ED ST · 02-08-2006, 10:33 AM

If there is a display on the timer, does that mean you can set time but that the bed won't start when you press go? If that's the case, go to the contactor and manually press the coil in with a screwdriver. (Don't touch any wires!) Does the bed light up? If yes, probably a communication problem between timer and contactor. If no, then it's an electrical problem, you don't have voltage. Hope this helps!

gofis · 02-08-2006, 11:29 PM

Thanx for help.
The display show two 00's but nothing happened when the button is press.
there are two buckboosters connected to the bed. How long do the buckbooster last? could it be them that is causing the problem?

mr belvedere · 02-08-2006, 11:31 PM

It's not your buck boosters. Are you running this manually off of the onboard timer, or from a remote timer?

gofis · 02-09-2006, 09:07 AM

Running off a t-max, but disconnected the t-max still wouldn't run.

ED ST · 02-09-2006, 11:04 AM

If you can't set any time, only zeros, then it's a timer problem. The buck boost transformers don't have anything to do with your timer.

flex-tan · 02-13-2006, 07:45 AM

I would start by following Eds' advice. Be careful performing this operation....you may have to remove a cover on top of contactor to access plunger. Another option is to have a qualified tech. solve your problem. Where state are you located in?

Sarge · 02-13-2006, 08:11 AM

Do you have a by-pass plug in this unit? If your T-max is unhooked, you must have a bypass on this I believe. Never worked on this unit but most need some sort of by pass.

gofis · 02-17-2006, 11:19 PM

Located in Md. I have to go look for the bypass plug.

thanx

02-07-2006, 04:04 PM	#1 (permalink)
gofis Join Date: Aug 26 2004 Location: US Posts: 36 Rep Power: 0	Need Tech support and parts for Atlantis 205 Have an Atlantis 205 that just would not start. It has power to the display (00). Help!!!! thanx

02-08-2006, 09:23 AM	#2 (permalink)
Jason E Join Date: Dec 10 2002 Location: Florence KY Age: 46 Posts: 446 Rep Power: 28	Re: Need Tech support and parts for Atlantis 205 Good Luck, parts are a ****** to find for this bed the only place that has them is Heartland because of the Merge. At least that is the only place I found them. The bed is made by KBL you can buy parts from them but delivery was more than the parts so you have to order alot for it to make sense

02-08-2006, 10:33 AM	#3 (permalink)
ED ST Join Date: Jan 9 2004 Location: Cleveland, Ohio Posts: 809 Rep Power: 21	Re: Need Tech support and parts for Atlantis 205 If there is a display on the timer, does that mean you can set time but that the bed won't start when you press go? If that's the case, go to the contactor and manually press the coil in with a screwdriver. (Don't touch any wires!) Does the bed light up? If yes, probably a communication problem between timer and contactor. If no, then it's an electrical problem, you don't have voltage. Hope this helps!

02-08-2006, 11:29 PM	#4 (permalink)
gofis Join Date: Aug 26 2004 Location: US Posts: 36 Rep Power: 0	Re: Need Tech support and parts for Atlantis 205 Thanx for help. The display show two 00's but nothing happened when the button is press. there are two buckboosters connected to the bed. How long do the buckbooster last? could it be them that is causing the problem?

02-08-2006, 11:31 PM	#5 (permalink)
mr belvedere Mr. b Join Date: May 10 2005 Age: 54 Posts: 7,247 Rep Power: 68	Re: Need Tech support and parts for Atlantis 205 It's not your buck boosters. Are you running this manually off of the onboard timer, or from a remote timer? __________________ "A dusty bible leads to a dirty life ..." -Synonymous

02-09-2006, 09:07 AM	#6 (permalink)
gofis Join Date: Aug 26 2004 Location: US Posts: 36 Rep Power: 0	Re: Need Tech support and parts for Atlantis 205 Running off a t-max, but disconnected the t-max still wouldn't run.

02-09-2006, 11:04 AM	#7 (permalink)
ED ST Join Date: Jan 9 2004 Location: Cleveland, Ohio Posts: 809 Rep Power: 21	Re: Need Tech support and parts for Atlantis 205 If you can't set any time, only zeros, then it's a timer problem. The buck boost transformers don't have anything to do with your timer.

02-13-2006, 07:45 AM	#8 (permalink)
flex-tan Join Date: Oct 17 2005 Location: Texas Age: 62 Posts: 19 Rep Power: 0	Re: Need Tech support and parts for Atlantis 205 I would start by following Eds' advice. Be careful performing this operation....you may have to remove a cover on top of contactor to access plunger. Another option is to have a qualified tech. solve your problem. Where state are you located in?

02-13-2006, 08:11 AM	#9 (permalink)
Sarge Join Date: Feb 22 2003 Location: Michigan Age: 59 Posts: 1,389 Rep Power: 25	Re: Need Tech support and parts for Atlantis 205 Do you have a by-pass plug in this unit? If your T-max is unhooked, you must have a bypass on this I believe. Never worked on this unit but most need some sort of by pass.

02-17-2006, 11:19 PM	#10 (permalink)
gofis Join Date: Aug 26 2004 Location: US Posts: 36 Rep Power: 0	Re: Need Tech support and parts for Atlantis 205 Located in Md. I have to go look for the bypass plug. thanx

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)