bucsfan

Ok you mystic owners I have a question I have had mine for like 3 to 4 months now and love it to death my question is once you rinse the machine how are you cleaning the inside blue panels. We right now use the towel the customer used but lately we have noticed a slight stain mark inside the unit. Are you guys using a squeegee like window cleaners use? Any help would be great and any ideas how i can get the stain out without taking the blue with it thanks alot

jw61

The best way is to use a window cleaner's squeegee and follow it with a towel.

ellas14

Does anyone have any stains on the blue fiberglass? I do and cannot get it out!! Any suggestions?

asianTan

So far we haven't had any troubles with stains on the fiberglass. We squeegee it off and wipe with a towel. Once a week, we spray it down with a hose and windex it! Still looks fabulous!

heatheratmidnitesun

are you using water alone to spray down or are you mixing it (as recommended) with satitizing solution - some people are using wintergreen alcohol too...if you are using water alone this may be the problem with staining?? We use a towel to clean the booth because the squeegee gets us wet and takes longer (in my opinion) also, are you spraying your booth down at night and scrubbing it regularly??

bucsfan

ya we are doing all the stuff we are using sanitizing solution mixed in with the rinse cycle and we have still had a little staining we wipe down with a towel after everyuse adn at the end of the night we are using disinfectant and spraying it down ourselfs im afraid to take bleach to it to takes the stains out please someone tell me how to take the stains out

heatheratmidnitesun

I would probably call mystic tan and ask them what kind of cleaner to use...we haven't had this with any of our machines (7 of them) although the walls in the room seem to be another situation entirely

bucsfan

here is the fix to this use soft scrub and it will look good as new!!!!!!!!

Alarris

Thank you, Bucsfan! I know just what you are talking about - it's good to know what we can do to fix them! Thanks again!

love, alarris

Neon Beach

Once you have the walls cleaned nicely why not get some good quality auto or boat wax and apply it to the walls. This would help the solution to bead up/run off and slow down any penetration into the walls themselves.