cindylou

I dont know if something is wrong with my booth or if the solution is the problem. Can you please help me!! Feet are coming out with color in the front not the sides of ankles. Legs the same, color in front not the sides. I am a thin person. Also i hate the word but i have an orangie color. Not the color i am looking for especially in the busy season.
Anyone have suggestions for a solution for the mysic spray booth.
What solution is the BEST!!! Is there one out there!!!!

On Bronzer

Sounds more like its the booth than the solution . Could be orangie becuz too much is coming out in one place instead of all over. I admit I am not a fan of Mystic anything. Everyone has their own opinion to the "best", you'll just need to try others to find what works best for you. Have you contacted Mystic?

cindylou

I contacted the company i bought the solution from they are working on it.
Any suggestion to another solution ?
I am going to turn down the amount of solution that sprays out.

WiLLy-NiLLy

This is your booth right?

Sounds like you are not getting a full spray from all jets. Here is a tip that I have given to MANY Mystic owners and most of them are shocked when they here what it is because their own Mystic Reps. will not even tell them this.

Your lines will get a build up of solution over a period of usage. This build up in the lines can hamper the end spray and even can become clogged. Also these lines can oxidize up and if that happens you are taking the risk on contaminating your good juice as it passes thru the oxidzed lines.

Take like 1 gallon of HOT water. Pour it into one of your empty jugs for your booth. Hook it back up to your Booth and run like 8 to 10 consecutive sessions. FOR BEST RESULTS AGAIN USE HOT WATER. You should notice a big difference in the misting of the booth after you do this. In Busy season you should do this at least once a month! This could help your situation. You might want to give it a try!

Hope this helps you!

cindylou

Thanks so much for the great tip!! I will give it a try.

luvnmytan

You asked for a recommendation on which solution to use... which solution were you using that had those results? Not just which brand, but which formulation (original or premium) and which level were you spraying on?
Also, Mystic Tech Support can walk you through checking to make sure nozzles are spraying correctly so you can find out if it is a booth thing or solution thing...

Tanning Nazi

Sounds like a bad meter

mr belvedere

All I can offer here is that wiping down all of the walls after the rinse cycle "does make a difference". If you're doing this religiously, then we have to look at other possibilities like barrier cream application, cap and trade, and the alignment of the stars ...

__________________
"A dusty bible leads to a dirty life ..." -Synonymous