Solart 50 problem after lamp change - tanTALK

dkny · 06-10-2010, 08:10 PM

I just replaced the lamps on my solart 50 bed including the high pressure 500w bulbs. After the change I put them bed on, it stay on for 2 seconds than shut off and display read e-02. Anyone know what it could be?

DKNY

dkny · 06-10-2010, 08:18 PM

I think I know what it is, the top acrylic is not closed.

Brian Oshman · 06-10-2010, 10:15 PM

That is the airflow switch on the main fans. Look in the bottom, they are mounted on the sides of the two big fans. It has an aluminum flag. Hold the safety switch down on the lounge and start the bed and see which one is bouncing or not sucking into the fan.

I can look at that too on Monday.

dkny · 06-12-2010, 12:23 AM

Quote:

Originally Posted by Brian Oshman

That is the airflow switch on the main fans. Look in the bottom, they are mounted on the sides of the two big fans. It has an aluminum flag. Hold the safety switch down on the lounge and start the bed and see which one is bouncing or not sucking into the fan.

I can look at that too on Monday.

Thanks Brian, I just put the high pressure covers and the arylic back in place and it worked. Now I'm having issue with the Orbit bed, I was cleaning bottom of the bed where all the guts are and I must off touched something cause now the bed wont turn on, when I put the breaker on for the bed it makes a slight continuous humming noise and wont turn on. Might need you to take a look at it on Monday.

Brian Oshman · 06-12-2010, 08:46 AM

No problem.

suncentertan · 09-18-2010, 01:12 PM

I'm so happy I saw this. I have the same bed (Solart 50) and am having the same problem. I Just replaced all the lamps but the bottom acrylic is still off. I figured I didn't want to have to take it off again if one of the lamps doesn't work. I'll try this and keep my fingers crossed! Also, I have been looking everywhere for information on the Solart 50! I just purchased the tanning salon abut 1 1/2 months ago and am still kind of new to everything. I can't find anything for this bed and can't get in touch with the company. Do you have any info on it?!?!?
Thanks so much!

Beirne1986 · 02-17-2012, 04:32 AM

Hi all. Dose any one no what error3 means on the solart.

Beirne1986 · 02-17-2012, 01:03 PM

Thank you. I will have a go at that on Monday and let you no if it sorts it. Thanks again.

Beirne1986 · 02-20-2012, 10:33 AM

That worked perfect thanks. Turned out that the switch had been turned round.

06-10-2010, 08:10 PM	#1 (permalink)
dkny I'm Banned Join Date: Feb 28 2005 Age: 54 Posts: 45 Rep Power: 0	Solart 50 problem after lamp change I just replaced the lamps on my solart 50 bed including the high pressure 500w bulbs. After the change I put them bed on, it stay on for 2 seconds than shut off and display read e-02. Anyone know what it could be? DKNY

06-10-2010, 08:18 PM	#2 (permalink)
dkny I'm Banned Join Date: Feb 28 2005 Age: 54 Posts: 45 Rep Power: 0	Re: Solart 50 problem after lamp change I think I know what it is, the top acrylic is not closed.

06-10-2010, 10:15 PM	#3 (permalink)
Brian Oshman Guest Join Date: Apr 29 2001 Location: Stewartsville, NJ Age: 55 Posts: 3,121 Rep Power: 0	Re: Solart 50 problem after lamp change That is the airflow switch on the main fans. Look in the bottom, they are mounted on the sides of the two big fans. It has an aluminum flag. Hold the safety switch down on the lounge and start the bed and see which one is bouncing or not sucking into the fan. I can look at that too on Monday.

06-12-2010, 08:46 AM	#5 (permalink)
Brian Oshman Guest Join Date: Apr 29 2001 Location: Stewartsville, NJ Age: 55 Posts: 3,121 Rep Power: 0	Re: Solart 50 problem after lamp change No problem.

09-18-2010, 01:12 PM	#6 (permalink)
suncentertan Join Date: Aug 24 2010 Location: North of Boston-Mobile Posts: 10 Rep Power: 0	Re: Solart 50 problem after lamp change I'm so happy I saw this. I have the same bed (Solart 50) and am having the same problem. I Just replaced all the lamps but the bottom acrylic is still off. I figured I didn't want to have to take it off again if one of the lamps doesn't work. I'll try this and keep my fingers crossed! Also, I have been looking everywhere for information on the Solart 50! I just purchased the tanning salon abut 1 1/2 months ago and am still kind of new to everything. I can't find anything for this bed and can't get in touch with the company. Do you have any info on it?!?!? Thanks so much!

02-17-2012, 04:32 AM	#7 (permalink)
Beirne1986 Join Date: Feb 17 2012 Location: Manchester Posts: 9 Rep Power: 0	Re: Solart 50 problem after lamp change Hi all. Dose any one no what error3 means on the solart.

02-17-2012, 01:03 PM	#8 (permalink)
Beirne1986 Join Date: Feb 17 2012 Location: Manchester Posts: 9 Rep Power: 0	Re: Solart 50 problem after lamp change Thank you. I will have a go at that on Monday and let you no if it sorts it. Thanks again.

02-20-2012, 10:33 AM	#9 (permalink)
Beirne1986 Join Date: Feb 17 2012 Location: Manchester Posts: 9 Rep Power: 0	Re: Solart 50 problem after lamp change That worked perfect thanks. Turned out that the switch had been turned round.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lamp Change/	grundy	Tanning Salon Management	1	04-24-2009 08:02 AM
Need help with lamp problem.	JamesRW	Sun Doctors	7	04-05-2007 10:57 AM
Lamp Change?	TanJunkie3	Tanning Equipment	9	07-26-2006 07:50 AM