need big help from the pro techs

ja · 06-14-2005, 10:33 AM

hi , i am so confused. can anyone help? i bought a bed from a local salon to use in my home. it is a sunsource 5000. i had two electricians out to hook up the 220v to the house turned the bed on and the digital t max timer on the bed lights up and counts down time but the bulbs or fan do not come on???? is there a reset or something that needs to be done because we just cant figure it out. the bed was hooked up to work off a remote when it was used by the tanning salon. we tryed to hook it up that way also but it still doesnt work. there is a plug that goes from the bed to a 110v outlet and on it says hva- 3 . we hooked that to the remote timer and plugged it in but it still doesnt work. there is a little light on the side of the hva-3 thing but thats not coming on when i plug it in? i know there is power. is that little light supposed to come on?? if anyone can help i sure would appriciate it. thanks a bunch!!!

ergo · 06-14-2005, 02:18 PM

Sounds like you have power to the bed but the main contact or realy is not opening..Try pushing center in on main relay and see if the lamps come on make sure you have your contact wires hooked up correctly.Not real familiar with ets equipment but i would guees that the hva-3 you refer too is a power board and yes that needs power to operate.I would try to hook it up stand alone with out the remote timer..just use the hva-3 plug it into an outlet you now works and try that.

engfant · 06-14-2005, 02:37 PM

Nice bed when you finally get it going. Tans forever.

ja · 06-14-2005, 09:22 PM

gosh ergo i feel really stupid. i have no idea where the main relay is. ive not seen anything like that. where are the contact wires? the hva-3 looks just like a low volt plug. something that you might see attatched to a cordless phone plug or power pack type thing.we tryed to hook the bed up without using the remote but that didnt work. what does that plug opperate anyway? seems like the 220v should be all it needs, just plug that in and it should work???

engfant · 06-15-2005, 09:52 AM

that plug is for the remote timer. they use phone wire. I actually may have the instruction manual somewhere... is that the 12min or 20min bed? 32lamp?

Neon Beach · 06-15-2005, 10:48 AM

If it were used with a remore timer at one time, it may still be in "bypass" mode. This disables the units built in timer, usually.

ja · 06-15-2005, 01:41 PM

its a 20 min bed with 30 lamps

mr belvedere · 07-02-2005, 08:45 PM

Did you get this resolved? I noticed you didn't mention having the trigger wires from the J3 contact on the T-max hooked to your bed. This could be the problem. Hope this helps. Good luck.

tan2much · 07-04-2005, 01:20 AM

OOooo.. It seems like a good bed, should last a long time.

playitagainenterprises · 07-22-2005, 11:30 PM

I am sure it is the timer it is always by passed when it comes from the salon and goes into a home. We can walk you thru it if you need any help and yes it is a great bed and will run a long time. You can walk around on those and jump if you want on the shell that is strong bed.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No Techs to help me!!!!	evins4386	Technology Forum	12	05-08-2006 03:11 PM
permanent make up Techs	RedHotts	Salon Management	6	08-20-2002 04:56 PM
Computer Techs??	Nichole74	Technology Forum	4	03-18-2002 02:58 PM

06-14-2005, 02:37 PM	#3 (permalink)
engfant FREE ENGFANTUCATION Join Date: May 20 2003 Posts: 9,642 Rep Power: 13	Nice bed when you finally get it going. Tans forever.

06-14-2005, 09:22 PM	#4 (permalink)
ja Join Date: Jun 11 2005 Posts: 18 Rep Power: 0	gosh ergo i feel really stupid. i have no idea where the main relay is. ive not seen anything like that. where are the contact wires? the hva-3 looks just like a low volt plug. something that you might see attatched to a cordless phone plug or power pack type thing.we tryed to hook the bed up without using the remote but that didnt work. what does that plug opperate anyway? seems like the 220v should be all it needs, just plug that in and it should work???

06-15-2005, 09:52 AM	#5 (permalink)
engfant FREE ENGFANTUCATION Join Date: May 20 2003 Posts: 9,642 Rep Power: 13	that plug is for the remote timer. they use phone wire. I actually may have the instruction manual somewhere... is that the 12min or 20min bed? 32lamp?

06-15-2005, 10:48 AM	#6 (permalink)
Neon Beach I'm Banned Join Date: Nov 30 2000 Location: Ontario Age: 46 Posts: 52,065 Rep Power: 0	If it were used with a remore timer at one time, it may still be in "bypass" mode. This disables the units built in timer, usually.

07-02-2005, 08:45 PM	#8 (permalink)
mr belvedere DERFERATOR Join Date: May 10 2005 Age: 39 Posts: 8,667 Rep Power: 52	Did you get this resolved? I noticed you didn't mention having the trigger wires from the J3 contact on the T-max hooked to your bed. This could be the problem. Hope this helps. Good luck.

07-04-2005, 01:20 AM	#9 (permalink)
tan2much Join Date: Mar 19 2005 Posts: 251 Rep Power: 4	OOooo.. It seems like a good bed, should last a long time.

07-22-2005, 11:30 PM	#10 (permalink)
playitagainenterprises Join Date: May 31 2003 Posts: 1,000 Rep Power: 6	I am sure it is the timer it is always by passed when it comes from the salon and goes into a home. We can walk you thru it if you need any help and yes it is a great bed and will run a long time. You can walk around on those and jump if you want on the shell that is strong bed.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)