So You Want A Golden Tan? - tanTALK

Chippp · 02-12-2002, 03:14 PM

So You Want A Golden Tan?
Take A Sensible, Moderate And Responsible Approach

How The Body Tans

Your body's ability to achieve a tan is determined by its ability to produce melanin. The tanning process begins when melanocyte cells in the skin are stimulated by light rays that contain a combination of both UVA and UVB rays.

Exposure to UVB causes the melanocytes to produce melanin granules that are pinkish in color and travel upward toward the skin's horny layer or corneum. As the granules migrate upward they are oxidized or darkened through exposure to UVA.

To maximize tanning potential, the tanning system should have a balanced ratio of UVA to UVB. A tanning unit that relies on nearly all UVA to tan may be effective in oxidizing existing melanin but not in producing new melanin. Thus, a tanning unit with higher levels of UVB may be effective in stimulating melanin production but it may do little to oxidize or brown the melanin.

There are two phases to tanning--Immediate Pigment Darkening (IPD) and Actual or Delayed Tanning.

The first phase is most noticeable in individuals who have a higher degree of melanin already present in their skin--primarily Skin Type III and above. It is important to note that IPD may fade quickly after the first brief tanning session, and not all skin types will experience IPD.

Please don't confuse IPD with Heat Flux because it is not tanning. The immediate color change you may experience after a tanning session simply may be due to heat flux which is caused by blood rushing to the surface of the skin in an effort to cool it. Another example of this is how the skin changes color when using a hot tub or sauna.

A simple test to determine whether you have experienced actual tanning or heat flux is to take a cool shower after tanning. If your skin color changes and the redness disappears within 24 hours, chances are you may have simply experienced heat flux.

The hotter the tanning system the greater the chance of developing heat flux. It also should be noted that exposing the body to excessive levels of heat may have an increased drying effect on the skin and dehydrate the body.

Delayed or Actual Tanning is the process of producing melanin and its migration toward the surface of the skin. This process needs three to eight days to develop and; therefore, may take several days and several tanning sessions for noticeable results to occur.

As your tanning sessions continue in accordance with the exposure schedule for your skin type, a cycle of IPD and Delayed Tanning begins. The oxidation of newly formed melanin granules migrating toward the skin's surface combined with the oxidation of existing melanin may allow you to maintain your tan with just one or two sessions per week. Please consult your tanning salon operator who can formulate a gradual course of exposure to help you best achieve your tanning goals. And, if you are Skin Type I or cannot tan outdoors, please don't tan indoors.

Exposure Schedules

While the first visible signs of tanning occur through the oxidation of existing melanin, the biosynthesis of melanin begins in the layers beneath the surface of the skin.

Some people may be tempted to exceed the recommended session lengths listed on the unit's exposure schedule because they believe that tanning for 30 minutes on a 20-minute tanning bed will give them a better tan. This is incorrect, and exceeding the exposure schedule may prevent you from obtaining maximum tanning results and may cause an existing tan to fade.

Tanning for longer than those listed on the exposure schedule may result in damage to the melanin. Once damaged, the melanin may not complete the tanning process. Instead of oxidized or darkened melanin rising toward the surface of the skin, you may experience dry skin, blistering and peeling.

All indoor tanning equipment must comply with the U.S. Food and Drug Administration's federal regulations, which outline strict guidelines regarding UV output, exposure intervals and maximum allowable exposures.

All tanning equipment manufactured after September 1986 must exhibit an exposure schedule, featured in a conspicuous location, that clearly displays the length and frequency of the recommended tanning sessions allowed for individual skin types on that specific tanning device. Look for these to be posted on the tanning equipment in your tanning room.

The maximum exposure time allowed for most tanning systems is dictated by the precise amount of time required by the tanning system to achieve a level of output equal to 4 MEDs.

An MED, or Minimal Erythemal Dose, is a term used to express the threshold to which an individual can receive exposure to ultraviolet light without experiencing the signs of sunburn or erythema, which is defined as the reddening of the skin.

Your first tanning session may be as brief as two to three minutes, but don't get discouraged. During this time your skin receives .75 of an MED. The maximum exposure for all tanning systems that comply with federal 21 CFR 1040 is 4 MEDs or four times the Minimal Erythmal Dose.

While the maximum level of 4 MEDs is constant, the time period in which it is administered varies with the specific design and UVA/UVB output of the tanning unit. If you think this sounds confusing, it can be, so ask your tanning salon professional any questions you might have.

Visit: http://www.sstan.com/index.html

_________________
TanTalk Tanning Booth MODERATOR
Tanning Booths, for people that want only the very best.
Fast, Comfortable, Dark Tanning and Hygienic.
[ This Message was edited by: Chippp on 2002-02-12 14:47 ]

Angie · 02-12-2002, 07:20 PM

well written sir

Chippp · 02-12-2002, 07:53 PM

It wasn't me it is on the web site
http://www.sstan.com/index.html
give then a visit, and a hi.

_________________
TanTalk Tanning Booth MODERATOR
Tanning Booths, for people that want only the very best.
Fast, Comfortable, Dark Tanning and Hygienic.
[ This Message was edited by: Chippp on 2002-02-12 18:54 ]

MatrixMan · 10-15-2006, 01:28 PM

Quote:

So You Want A Golden Tan?

No.... I want a dark brown tan. :)

sundude · 10-15-2006, 08:14 PM

Quote:

Originally Posted by MatrixMan

No.... I want a dark brown Man. :)

What?

Neon Beach · 10-15-2006, 09:36 PM

You are likely not genetically capable of such a thing.

MatrixMan · 10-16-2006, 12:12 AM

Quote:

You are likely not genetically capable of such a thing.

Actually with my some of my moms commanche indian genes, i can get DAMNNNN dark.

Neon Beach · 10-16-2006, 12:16 AM

grrrrrrrrrrrr

MatrixMan · 10-16-2006, 12:19 AM

HAHA HOOHOO HEHE.

10-15-2006, 09:36 PM	#6 (permalink)
Neon Beach Join Date: Nov 30 2000 Location: Ontario Age: 62 Posts: 38,594 Rep Power: 108	Re: So You Want A Golden Tan? You are likely not genetically capable of such a thing. __________________ www.talktimmins.com -- http://www.drjawnswebworx.com/

10-16-2006, 12:16 AM	#8 (permalink)
Neon Beach Join Date: Nov 30 2000 Location: Ontario Age: 62 Posts: 38,594 Rep Power: 108	Re: So You Want A Golden Tan? grrrrrrrrrrrr __________________ www.talktimmins.com -- http://www.drjawnswebworx.com/

10-16-2006, 12:19 AM	#9 (permalink)
MatrixMan I'm Banned Join Date: Sep 9 2005 Age: 34 Posts: 1,555 Rep Power: 0	Re: So You Want A Golden Tan? HAHA HOOHOO HEHE.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
want to be more than golden	dqfine	Tanning Lotion Buzz	14	04-01-2005 11:08 AM
Golden Key or Key West	tangirl	General Tanning Industry Discussions	5	04-12-2002 06:54 PM

02-12-2002, 03:14 PM	#1 (permalink)
Chippp Join Date: Apr 19 2001 Posts: 2,262 Rep Power: 24	So You Want A Golden Tan? Take A Sensible, Moderate And Responsible Approach How The Body Tans Your body's ability to achieve a tan is determined by its ability to produce melanin. The tanning process begins when melanocyte cells in the skin are stimulated by light rays that contain a combination of both UVA and UVB rays. Exposure to UVB causes the melanocytes to produce melanin granules that are pinkish in color and travel upward toward the skin's horny layer or corneum. As the granules migrate upward they are oxidized or darkened through exposure to UVA. To maximize tanning potential, the tanning system should have a balanced ratio of UVA to UVB. A tanning unit that relies on nearly all UVA to tan may be effective in oxidizing existing melanin but not in producing new melanin. Thus, a tanning unit with higher levels of UVB may be effective in stimulating melanin production but it may do little to oxidize or brown the melanin. There are two phases to tanning--Immediate Pigment Darkening (IPD) and Actual or Delayed Tanning. The first phase is most noticeable in individuals who have a higher degree of melanin already present in their skin--primarily Skin Type III and above. It is important to note that IPD may fade quickly after the first brief tanning session, and not all skin types will experience IPD. Please don't confuse IPD with Heat Flux because it is not tanning. The immediate color change you may experience after a tanning session simply may be due to heat flux which is caused by blood rushing to the surface of the skin in an effort to cool it. Another example of this is how the skin changes color when using a hot tub or sauna. A simple test to determine whether you have experienced actual tanning or heat flux is to take a cool shower after tanning. If your skin color changes and the redness disappears within 24 hours, chances are you may have simply experienced heat flux. The hotter the tanning system the greater the chance of developing heat flux. It also should be noted that exposing the body to excessive levels of heat may have an increased drying effect on the skin and dehydrate the body. Delayed or Actual Tanning is the process of producing melanin and its migration toward the surface of the skin. This process needs three to eight days to develop and; therefore, may take several days and several tanning sessions for noticeable results to occur. As your tanning sessions continue in accordance with the exposure schedule for your skin type, a cycle of IPD and Delayed Tanning begins. The oxidation of newly formed melanin granules migrating toward the skin's surface combined with the oxidation of existing melanin may allow you to maintain your tan with just one or two sessions per week. Please consult your tanning salon operator who can formulate a gradual course of exposure to help you best achieve your tanning goals. And, if you are Skin Type I or cannot tan outdoors, please don't tan indoors. Exposure Schedules While the first visible signs of tanning occur through the oxidation of existing melanin, the biosynthesis of melanin begins in the layers beneath the surface of the skin. Some people may be tempted to exceed the recommended session lengths listed on the unit's exposure schedule because they believe that tanning for 30 minutes on a 20-minute tanning bed will give them a better tan. This is incorrect, and exceeding the exposure schedule may prevent you from obtaining maximum tanning results and may cause an existing tan to fade. Tanning for longer than those listed on the exposure schedule may result in damage to the melanin. Once damaged, the melanin may not complete the tanning process. Instead of oxidized or darkened melanin rising toward the surface of the skin, you may experience dry skin, blistering and peeling. All indoor tanning equipment must comply with the U.S. Food and Drug Administration's federal regulations, which outline strict guidelines regarding UV output, exposure intervals and maximum allowable exposures. All tanning equipment manufactured after September 1986 must exhibit an exposure schedule, featured in a conspicuous location, that clearly displays the length and frequency of the recommended tanning sessions allowed for individual skin types on that specific tanning device. Look for these to be posted on the tanning equipment in your tanning room. The maximum exposure time allowed for most tanning systems is dictated by the precise amount of time required by the tanning system to achieve a level of output equal to 4 MEDs. An MED, or Minimal Erythemal Dose, is a term used to express the threshold to which an individual can receive exposure to ultraviolet light without experiencing the signs of sunburn or erythema, which is defined as the reddening of the skin. Your first tanning session may be as brief as two to three minutes, but don't get discouraged. During this time your skin receives .75 of an MED. The maximum exposure for all tanning systems that comply with federal 21 CFR 1040 is 4 MEDs or four times the Minimal Erythmal Dose. While the maximum level of 4 MEDs is constant, the time period in which it is administered varies with the specific design and UVA/UVB output of the tanning unit. If you think this sounds confusing, it can be, so ask your tanning salon professional any questions you might have. Visit: http://www.sstan.com/index.html _________________ TanTalk Tanning Booth MODERATOR Tanning Booths, for people that want only the very best. Fast, Comfortable, Dark Tanning and Hygienic. [ This Message was edited by: Chippp on 2002-02-12 14:47 ]

02-12-2002, 07:20 PM	#2 (permalink)
Angie Join Date: Oct 27 2001 Posts: 68 Rep Power: 0	well written sir

02-12-2002, 07:53 PM	#3 (permalink)
Chippp Join Date: Apr 19 2001 Posts: 2,262 Rep Power: 24	It wasn't me it is on the web site http://www.sstan.com/index.html give then a visit, and a hi. _________________ TanTalk Tanning Booth MODERATOR Tanning Booths, for people that want only the very best. Fast, Comfortable, Dark Tanning and Hygienic. [ This Message was edited by: Chippp on 2002-02-12 18:54 ]

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)