disassemble dr kern blue dream 34/3 bed

pcupit · 07-22-2007, 09:06 PM

HELLO EVERYONE I'M NEW HERE. I COULD USE SOME HELP, I CLOSED A SALON YESTERDAY
AND I HAVE A DR KERN BLUE DREAM 34/3-NO MANUAL AND WAS ALREADY TOGETHER
WHEN I BOUGHT THE SALON. I HAVE THIS SMALL PAPER WITH DISCRIPTION ETC., SAYS VERY EASY TO ASSEMBLE....WELL ITS LOOKING INPOSSIBLE TO TAKE IT APART. EVEN IF WE WERE TO GET IT OUT OF THE ROOM ITS IN, WON'T FIT THRU FRONT OR BACK DOOR...ANY HELP WOULD BE APPRECIATED.

On Bronzer · 07-23-2007, 06:28 AM

Try going on line for manual or call Dr Kern in Indiana

Brian Oshman · 07-23-2007, 07:37 AM

Remove the pistons. Remove the top end caps. THen you can remove the hinges that hold the top. Once you have the top off you can take the legs off of the bottom if you need to. THis bed is not hard to take apart.

Sarge · 08-06-2007, 12:14 PM

Brian, this is a 34/3 spring assisted not shocks and its is a pain in the a ss to take apart. On this unit you need to close the canopy and push down hard. On the back of the bed you will have a couple of allen screws that need to go in on each side. There is a steal bar that is hooked to the springs and when you push down on the canopy it brings the bar up then on the left and right side in the back you will need to put the allen screws in (2 screws for each side) this holds the steal bar in the up position. (its a pain in the butt because its hard to line them up) The canopy has big hooks on it that hooks into this steal bar and you tilt the canopy all the way up and then lift it out off the steal bar.

Before you do all of this, you need to lift up the bench and unhook the canopy cords, bench cords and main power.

If you can't line up the steal bars, then pull the bed away from the wall, take all the screws out from the plates on the back. Loosen the tention on both sides until you can take off the springs from the top steal bar then you can lift off the canopy. A BIG PAIN TO PUT BACK ON WITHOUT TEARING UP YOUR HANDS, NEED LOTS OF STRENGTH TO HOOK UP THE SPRINGS TO THE BAR AND PULL BACK UP TO THE TOP TO LOCK IN THE ALLEN SCREWS.

If you have any other questions on this please don't hesitate to ask PCUPIT.

07-22-2007, 09:06 PM	#1 (permalink)
pcupit Join Date: Jul 22 2007 Location: 3604 w 80th ln Posts: 2 Rep Power: 0	disassemble dr kern blue dream 34/3 bed HELLO EVERYONE I'M NEW HERE. I COULD USE SOME HELP, I CLOSED A SALON YESTERDAY AND I HAVE A DR KERN BLUE DREAM 34/3-NO MANUAL AND WAS ALREADY TOGETHER WHEN I BOUGHT THE SALON. I HAVE THIS SMALL PAPER WITH DISCRIPTION ETC., SAYS VERY EASY TO ASSEMBLE....WELL ITS LOOKING INPOSSIBLE TO TAKE IT APART. EVEN IF WE WERE TO GET IT OUT OF THE ROOM ITS IN, WON'T FIT THRU FRONT OR BACK DOOR...ANY HELP WOULD BE APPRECIATED.

07-23-2007, 06:28 AM	#2 (permalink)
On Bronzer Join Date: Jan 30 2006 Location: Michigan Posts: 420 Rep Power: 3	Re: disassemble dr kern blue dream 34/3 bed Try going on line for manual or call Dr Kern in Indiana

07-23-2007, 07:37 AM	#3 (permalink)
Brian Oshman Brian Oshman Join Date: Apr 29 2001 Location: High Bridge, NJ Age: 39 Posts: 893 Rep Power: 12	Re: disassemble dr kern blue dream 34/3 bed Remove the pistons. Remove the top end caps. THen you can remove the hinges that hold the top. Once you have the top off you can take the legs off of the bottom if you need to. THis bed is not hard to take apart. __________________

08-06-2007, 12:14 PM	#4 (permalink)
Sarge Join Date: Feb 22 2003 Location: Michigan Age: 44 Posts: 1,521 Rep Power: 9	Re: disassemble dr kern blue dream 34/3 bed Brian, this is a 34/3 spring assisted not shocks and its is a pain in the a ss to take apart. On this unit you need to close the canopy and push down hard. On the back of the bed you will have a couple of allen screws that need to go in on each side. There is a steal bar that is hooked to the springs and when you push down on the canopy it brings the bar up then on the left and right side in the back you will need to put the allen screws in (2 screws for each side) this holds the steal bar in the up position. (its a pain in the butt because its hard to line them up) The canopy has big hooks on it that hooks into this steal bar and you tilt the canopy all the way up and then lift it out off the steal bar. Before you do all of this, you need to lift up the bench and unhook the canopy cords, bench cords and main power. If you can't line up the steal bars, then pull the bed away from the wall, take all the screws out from the plates on the back. Loosen the tention on both sides until you can take off the springs from the top steal bar then you can lift off the canopy. A BIG PAIN TO PUT BACK ON WITHOUT TEARING UP YOUR HANDS, NEED LOTS OF STRENGTH TO HOOK UP THE SPRINGS TO THE BAR AND PULL BACK UP TO THE TOP TO LOCK IN THE ALLEN SCREWS. If you have any other questions on this please don't hesitate to ask PCUPIT.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dr. Kern Blue Dream Facials going on and off.	YucaTan	Equipment	17	11-11-2005 10:42 AM
Dr Kern Blue Dream 42/4 CX VHR	Pcola	For Sale	7	05-11-2004 12:24 PM
Dr. Kern Blue Dream	electrictanman	For Sale	35	05-04-2004 09:30 PM
Dr Kern Blue Dream Stretch	SUNMAN	Equipment	5	02-16-2004 06:03 AM
2002 Dr. Kern 32/3 Blue Dream	bsmart	For Sale	4	12-01-2003 12:23 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)