Help with Sunvision

bronzed_guy · 01-26-2006, 04:29 PM

I'm having a problem with one of my beds It's a Sunvision X30 - For some reason it keeps losing power. At times the display area will be blank. If I throw the breaker to the bed it regains powers but then usually goes out again after a tanning session.

I've done several tests to the bed and Sometimes it reads 88 in the display box and the fan cannot be adjusted during the session and you can not see your time counting down. it will shut off after the alloted time but not beep with the remaining 5 Seconds left. the the bed dies until I throw the breaker. The T-max manager is not picking up any errors at all, the time will go to the bed even if the display area is dead.

Any Idea's? my Electrican is away till Monday.

mr belvedere · 01-26-2006, 06:04 PM

A failing circuit board or loose cable connection somewhere. My bet on that unit is a loose or burned out cable connection. Open the hood (take off the top plastic piece on the canopy) and have a look. Hope this helps. Good luck.

bronzed_guy · 01-27-2006, 04:34 AM

Will look into it! Thanks

01-26-2006, 04:29 PM	#1 (permalink)
bronzed_guy Join Date: Nov 3 2005 Location: Ontario Posts: 52 Rep Power: 0	Help with Sunvision I'm having a problem with one of my beds It's a Sunvision X30 - For some reason it keeps losing power. At times the display area will be blank. If I throw the breaker to the bed it regains powers but then usually goes out again after a tanning session. I've done several tests to the bed and Sometimes it reads 88 in the display box and the fan cannot be adjusted during the session and you can not see your time counting down. it will shut off after the alloted time but not beep with the remaining 5 Seconds left. the the bed dies until I throw the breaker. The T-max manager is not picking up any errors at all, the time will go to the bed even if the display area is dead. Any Idea's? my Electrican is away till Monday.

01-26-2006, 06:04 PM	#2 (permalink)
mr belvedere DERFERATOR Join Date: May 10 2005 Age: 38 Posts: 8,475 Rep Power: 52	Re: Help with Sunvision A failing circuit board or loose cable connection somewhere. My bet on that unit is a loose or burned out cable connection. Open the hood (take off the top plastic piece on the canopy) and have a look. Hope this helps. Good luck. __________________ "A dusty bible leads to a dirty life ..." -Synonymous

01-27-2006, 04:34 AM	#3 (permalink)
bronzed_guy Join Date: Nov 3 2005 Location: Ontario Posts: 52 Rep Power: 0	Re: Help with Sunvision Will look into it! Thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)