ETS Star Power 52/4F Help - Page 3

UltimateTanSJ · 08-16-2007, 10:55 PM

If it is like a buzzing or vibrating sound, it could also be the facial glass vibrating in it's frame.

PatParadise · 08-17-2007, 09:15 PM

Sometimes when removing the shoulder tanner from the end of the beds the tiny little wires get pinched between the bed frame and short out. Also, the facial lamps can have problems with the lamp holders as one writer indicated. Good luck PatParadise

sz girl · 08-17-2007, 11:06 PM

sorry to confuse you-but my ets solaris speed 42/3 was the one making the weird vibrating nosie. it is also making the weird facial zap on startup too. but i think we detected the source of that one -being that the phillips facials are just a little short-however- the canopy is making a vibrating noise and i can tell you why- when we relamped the bed we got the bright idea to take the metal top off the canopy plus the end caps and make sure it wasnt dusty. well it was super dusty. so we cleaned it and put it back together. no its making a noise cuz we messed with it. pretty sure its something vibrating around the 3 fans in the back part of the canopy. we will probably have to take the 30 pound piece of metal off again along with the end caps that have really short screws in a very long narrow hole that no screwdriver can hold on to! i'm sure there is a screwdriver out there that will handle this job but seriously-why make the darn tunnel for the screw soooooo longggggggggg???

sz girl · 08-18-2007, 04:19 PM

ok-guess i should have read the last page- sorry bout that

Indigo · 08-23-2007, 08:22 PM

I have a 30/3F Sunvision, I have replaced the Facials however when the bed is started then either 1 comes on or sometimes 2, the odd time all three. When I test the bed it is never the same Facials that come on. Would this be a ballast problem as well?

UltimateTanSJ · 08-23-2007, 10:56 PM

Low voltage, ballasts, or ignitors.

Sarge · 08-24-2007, 09:41 AM

Change the ignitors to the bag electronic ignitors. They are a little more expensive but excellent.

08-16-2007, 10:55 PM	#21 (permalink)
UltimateTanSJ I love Derf!! Join Date: Nov 8 2005 Location: California Age: 27 Posts: 676 Rep Power: 5	Re: ETS Star Power 52/4F Help If it is like a buzzing or vibrating sound, it could also be the facial glass vibrating in it's frame. __________________ Joseph ~I am the NFC~ Last edited by UltimateTanSJ; 08-16-2007 at 10:58 PM.

08-17-2007, 09:15 PM	#22 (permalink)
PatParadise IMWW Join Date: Jul 14 2004 Location: 9202 Lexington Ave, Circle Pines, MN 55014 Age: 59 Posts: 311 Rep Power: 4	Re: ETS Star Power 52/4F Help Sometimes when removing the shoulder tanner from the end of the beds the tiny little wires get pinched between the bed frame and short out. Also, the facial lamps can have problems with the lamp holders as one writer indicated. Good luck PatParadise

08-17-2007, 11:06 PM	#23 (permalink)
sz girl I love Derf!! Join Date: Apr 19 2007 Location: usa Posts: 409 Rep Power: 2	Re: ETS Star Power 52/4F Help sorry to confuse you-but my ets solaris speed 42/3 was the one making the weird vibrating nosie. it is also making the weird facial zap on startup too. but i think we detected the source of that one -being that the phillips facials are just a little short-however- the canopy is making a vibrating noise and i can tell you why- when we relamped the bed we got the bright idea to take the metal top off the canopy plus the end caps and make sure it wasnt dusty. well it was super dusty. so we cleaned it and put it back together. no its making a noise cuz we messed with it. pretty sure its something vibrating around the 3 fans in the back part of the canopy. we will probably have to take the 30 pound piece of metal off again along with the end caps that have really short screws in a very long narrow hole that no screwdriver can hold on to! i'm sure there is a screwdriver out there that will handle this job but seriously-why make the darn tunnel for the screw soooooo longggggggggg???

08-18-2007, 04:19 PM	#24 (permalink)
sz girl I love Derf!! Join Date: Apr 19 2007 Location: usa Posts: 409 Rep Power: 2	Re: ETS Star Power 52/4F Help ok-guess i should have read the last page- sorry bout that

08-23-2007, 08:22 PM	#25 (permalink)
Indigo Join Date: Jan 31 2006 Location: Ontario Age: 34 Posts: 93 Rep Power: 0	Re: ETS Star Power 52/4F Help I have a 30/3F Sunvision, I have replaced the Facials however when the bed is started then either 1 comes on or sometimes 2, the odd time all three. When I test the bed it is never the same Facials that come on. Would this be a ballast problem as well?

08-23-2007, 10:56 PM	#26 (permalink)
UltimateTanSJ I love Derf!! Join Date: Nov 8 2005 Location: California Age: 27 Posts: 676 Rep Power: 5	Re: ETS Star Power 52/4F Help Low voltage, ballasts, or ignitors. __________________ Joseph ~I am the NFC~

08-24-2007, 09:41 AM	#27 (permalink)
Sarge Join Date: Feb 22 2003 Location: Michigan Age: 44 Posts: 1,521 Rep Power: 9	Re: ETS Star Power 52/4F Help Change the ignitors to the bag electronic ignitors. They are a little more expensive but excellent.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for a Star Power	sbtan	For Sale	0	01-11-2005 06:53 PM
Looking for a Star Power	sbtan	For Sale	1	01-07-2005 03:42 PM
Star Power Bed 255R Wolff Model, not tanning as expected	balael	Open Forum	10	05-07-2004 06:27 AM
Star Power wanted	West Side Tanner	For Sale	1	02-05-2004 10:48 AM
Star power 52 low hours!! great PRICE in CA	bucsfan	For Sale	6	06-22-2003 07:06 PM