| I recommend auto addressing the entire salon. Make sure no one is tanning and each timer is displaying a 0.1) Press the Start/Stop buttons under Display 1 and Display 8 on the T-Max Manager at the same time until the displays change values. Release the buttons.2) Press and release the Start/Stop button under Display number 2. Display 3 will change to a 1. Each timer in the rooms will read a 99 and sound an alarm.3) Go to each room in numeric order (room 1 first, room 2 second and so on) and press the start/stop button on each timer. The alarm should stop and the timer show read a 0. Make sure the timer reads a 0 before you go to the next room.4) After you have completed pressing the buttons in each room, go back to the T-Max Manager and cycle power to it. Your addresses will be set.Let me know if you have any other questions.Kevin BarrettApplied Digital, Inc. Technical Support. |