tanTALK - Tanning Salon Business Owners Community - View Single Post

SSTan · 05-23-2010, 02:50 AM

I am having a problem connecting a T-Max 3A timer to our Intellitan CCS3 controller.
We had 6 Sundash beds and 6 Tmax 3As already working with the CCS3. We are upgrading a Sundash bed and have tried to hook up a TMax 3A with a 15 minute SIP chip installed. I cannot get the CCS3 controller to communicate with the new TMax 3A timer.
We have another salon with a TMax manager and we tested the 3A on that system and the timer works.

We tried the new SIP chip in another 3A timer and it does not communicate with intellitan CCS3.

We put a working SIP chip in the new timer and cannot get the new timer to communicate.

The new 3A timer only works with a 3A chip on a TMax controller, not with a working SIP chip with a Intellitan CCS3 controller.
It is not the 3A unless there is some way to change the protocol on the new 3A from TMax to SIP.

The new SIP chip we were sent is a 3GW2V15x5. The other 3A SIPs on our network are SIP15v14 or SIP3 20V14 etc.. They all start with SIP, we were told the 3GW2v15v5 is SIP compatible. Either way the 3A won't work even with a SIP type chip in it with the CCS3.
ADI support probably is not available until Monday morning.
Any ideas?

05-23-2010, 02:50 AM	#1 (permalink)
SSTan Join Date: Jun 28 2003 Posts: 88 Rep Power: 0	Intellitan CCS3 and TMax 3A timers??? I am having a problem connecting a T-Max 3A timer to our Intellitan CCS3 controller. We had 6 Sundash beds and 6 Tmax 3As already working with the CCS3. We are upgrading a Sundash bed and have tried to hook up a TMax 3A with a 15 minute SIP chip installed. I cannot get the CCS3 controller to communicate with the new TMax 3A timer. We have another salon with a TMax manager and we tested the 3A on that system and the timer works. We tried the new SIP chip in another 3A timer and it does not communicate with intellitan CCS3. We put a working SIP chip in the new timer and cannot get the new timer to communicate. The new 3A timer only works with a 3A chip on a TMax controller, not with a working SIP chip with a Intellitan CCS3 controller. It is not the 3A unless there is some way to change the protocol on the new 3A from TMax to SIP. The new SIP chip we were sent is a 3GW2V15x5. The other 3A SIPs on our network are SIP15v14 or SIP3 20V14 etc.. They all start with SIP, we were told the 3GW2v15v5 is SIP compatible. Either way the 3A won't work even with a SIP type chip in it with the CCS3. ADI support probably is not available until Monday morning. Any ideas? Last edited by SSTan; 05-23-2010 at 02:52 AM.