tanTALK - View Single Post

STC2008 · 03-22-2008, 11:26 PM

Sounds like you have a lamp hour discrepency. This has happened to me several times. If the bed is connected to a Tmax Manager via a daisy chain, disconnect it at the phone jack. Wait 30 seconds and do the following. Have your bed manual open to the viewing and editing parameters section.

1.) Press Start, Up (Time Menu), & Reset at the same time - this will clear the Help 4 and you should then see all zeros - 0000 (no colon)
2.) Then press Up (Time Menu) until you get to 0010 (Level 1 password clearance) - press reset
3.) Press Up (Time Menu) until you get to Parameter 6 Lamp Hours (look in your manual at viewing & editing parameters) and press reset.
4.) Adjust the lamp hours up or down 1 hour by pushing Up or Down on the Time Menu then press Reset
5.) Press Start to exit Parameter Mode
6.) Connect your the bed back up to the Tmax Network

If you still have issues, you may need to call Sun Ergoline for tech help. The number is on your bed manual. Hope that helps.

03-22-2008, 11:26 PM	#2 (permalink)
STC2008 Join Date: Oct 3 2007 Location: Missouri Age: 35 Posts: 43 Rep Power: 0	Re: HELP WITH SUNDASH 232 Sounds like you have a lamp hour discrepency. This has happened to me several times. If the bed is connected to a Tmax Manager via a daisy chain, disconnect it at the phone jack. Wait 30 seconds and do the following. Have your bed manual open to the viewing and editing parameters section. 1.) Press Start, Up (Time Menu), & Reset at the same time - this will clear the Help 4 and you should then see all zeros - 0000 (no colon) 2.) Then press Up (Time Menu) until you get to 0010 (Level 1 password clearance) - press reset 3.) Press Up (Time Menu) until you get to Parameter 6 Lamp Hours (look in your manual at viewing & editing parameters) and press reset. 4.) Adjust the lamp hours up or down 1 hour by pushing Up or Down on the Time Menu then press Reset 5.) Press Start to exit Parameter Mode 6.) Connect your the bed back up to the Tmax Network If you still have issues, you may need to call Sun Ergoline for tech help. The number is on your bed manual. Hope that helps.