aimeekat

So I come in one day last week and my manager was all blank with one 0 inthe 5 display. I removed power and plugged it back in-no problems. Figured we had a powerspike overnight, no worries the rest of the day.

Same thing happened today-same response from me. Looked like it reset no problem. First tanner (happened to be in my stand-up/room 2) goes in and the screen goes crazy and the thing starts chirping erratically at me after the first 4 minutes of the 12min session. No interruption to the tan session. As if the beeps are going off so quickly it sounds like morse code. Again, I unplug the power and it goes nutso again-tons of numbers scroll past, so out with the power again. Seems to be fine for 15 min and then it goes to all blank but display 5 is a 0.

Anyone had this happen and what should I do now?

Oh, as I'm writing this that 0 in the 5 display turned to an 8. And an "H" keeps popping up next to the #2 display intermittenly.

I'm using helios, but I dont' think that's the issue.


Edit-3 hrs after I originally wrote this an "H" is the only thing that is on the screen. Tanning sessions are running fine but this can't be normal...