|
willtanu: I do not know much about the database 10,000 timer control system, but usually most remote timer systems have a wall switch in the room with the tanning units and on the back of them there is a spot that is marked "contact" and this is where the beds remote wires are connected. There should be a length of 18/2 lampcord comming from the back of the Lumina series units with a two position terminal block connected on the end of it that you would use to connect the unit to the wall switch inside the room with the unit. The remote timer needs some type of a way to make contact between the two wires comming from the back of the unit to get it to come on. I hope this information will help you get your bed to function with the remote timer system that you have.
|